how to make code generation with OMAP-L138 Experimenter Kit, CCSv5.5 and MATLAB SIMULINK

Hello, ladies and gentlemen!

I am using CCSv5.5 with matlab (x64) R2014b (simulink) runing on windows 7 (x64), when I try to bring a simple Model (just with Audio of Multimedia File, C6748EVM DAC, C6748EVM ADC, Audio Device and C6000 Reset Block ) to work, the following error will be shown

;---------------------------------------------------------------------------------------------------------------------------------

### Creating makefile: C:\Users\bisp\Documents\MATLAB\c6748evmwithreset_ticcs\c6748evmwithreset.mk ### Makefile creation done. ### Building makefile...

The call to idelink_ert_make_rtw_hook, during the exit hook generated the following error: Error while building the project.

The build process will terminate as a result. Error while building the project. The build failed with the following message: "C:/ti/ccsv5/tools/compiler/c6000_7.4.8/bin/cl6x" -I"C:/Program Files/MATLAB/R2014b/toolbox/idelink/extensions/ticcs/inc" -I"C:/Program Files/MATLAB/R2014b/toolbox/shared/dspblks/extern/include" -I"C:/Program Files/MATLAB/R2014b/extern/include/multimedia" -I"C:/Program Files/MATLAB/R2014b/toolbox/shared/dsp/vision/matlab/include" -I"C:/Users/bisp/Documents/MATLAB/c6748evmwithreset_ticcs" -I"C:/Users/bisp/Documents/MATLAB" -I"C:/Program Files/MATLAB/R2014b/extern/include" -I"C:/Program Files/MATLAB/R2014b/simulink/include" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src" -I"C:/Program Files/MATLAB/R2014b/rtw/c/src/ext_mode/common" -I"C:/Program Files/MATLAB/R2014b/rtw/c/ert" -I"C:/Program Files/MATLAB/R2014b/toolbox/dsp/include" -I"C:/Program Files/MATLAB/R2014b/toolbox/dsp/extern/src/export/include/src" -I"C:/Program Files/MATLAB/R2014b/toolbox/dsp/extern/src/export/include" -I"C:/Program Files/MATLAB/R2014b/toolbox/target/extensions/processor/tic6000/blks/lct/include" -I"C:/ti/pspdrivers_01_30_01/packages" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/cslr" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/platforms/evm6748" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/platforms/evm6748/audio" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/mcasp" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/i2c" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/platforms/codec" -I"C:/ti/pspdrivers_01_30_01/packages/ti/pspiom/psc" -I"C:/ti/edma3_lld_01_11_03_01/packages" -I"C:/ti/edma3_lld_01_11_03_01/packages/ti/sdo/edma3/drv" -D"CHIP_OMAPL138" -D"__TICCSC__" -D"RT" -D"USE_RTMODEL" -mv6400+ -D"MODEL=c6748evmwithreset" -D"NUMST=3" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=1" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=1" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -I"C:/ti/ccsv5/tools/compiler/c6000_7.4.8/include" -I"C:/ti/OMAPL138_CSL/include" -fr"./derived/" ./HostLib_Audio.c ./HostLib_MMFile.c ./HostLib_Multimedia.c ./HostLib_rtw.c ./c6748evm_aic31.c ./c6748evm_i2c.c ./MW_c6xxx_csl.c ./c6748evmwithreset.c ./c6748evmwithreset_data.c ./c6748evmwithreset_main.c [HostLib_Audio.c] "C:/Program Files/MATLAB/R2014b/toolbox/shared/dspblks/extern/include/HostLib_rtw.h", line 15: fatal error: could not open source file "dlfcn.h" 1 fatal error detected in the compilation of "./HostLib_Audio.c". Compilation terminated. >> Compilation failure gmake: * [derived/HostLib_Audio.obj] Error 1

Component: Simulink | Category: Block error

;----------------------------------------------------------------------------------------------------------------

Before I ran the model, I was already went through the checkEnvSetup and xmakefilesetup just similar like the video * Simulink code generation from MATLAB for TI C2000 processors- Hello World using CCS v4/v5 * on youtube. Only a few parameters would be changed because of the OMAP-L138 processor and its different location.

;-----------------------------------------------------------------------------------------------------------------------------

Here it ist at Matlab Command Window:

>> checkEnvSetup('ccsv5', 'omapl138evm')

1. Checking CCSv5 (Code Composer Studio) version Required version: 5.0 or later Required for : Code Generation Your Version : 5.5.0 ### Setting environment variable "TI_DIR" to "C:\ti\ccsv5"

2. Checking C6000 CSL (TMS320C6000 Chip Support Library) version Required version: 2.31.00.10 or later Required for : Code generation Your Version : 2.31.00.15 ### Setting environment variable "CSL_C6000_INSTALLDIR" to "C:\ti\C6xCSL" ### Setting environment variable "CSL_C6000_INSTALLDIR" to "C:\ti\C6xCSL"

3. Checking XDC Tools (eXpress DSP Components) version Required version: 3.16.02.32 or later Required for : Code generation Your Version : 3.24.03.33

4. Checking CGT (Code Generation Tools) version Required version: 6.1.18 to 7.3.1 Required for : Code generation Your Version : 6.1.23 ### Setting environment variable "C6000_CGT_INSTALLDIR" to "C:\ti\CGT_6_1_23" ### Setting environment variable "C6000_CGT_INSTALLDIR" to "C:\ti\CGT_6_1_23"

5. Checking DSP/BIOS (Real Time Operating System) version Required version: 5.33.05 to 5.41.11.38 Required for : Code generation Your Version : 5.42.01.09 ### Setting environment variable "CCSV5_DSPBIOS_INSTALLDIR" to "C:\ti\bios_5_42_01_09" ### Setting environment variable "CCSV5_DSPBIOS_INSTALLDIR" to "C:\ti\bios_5_42_01_09" The version found for "DSP/BIOS" differs from the one used for our software validation. Use it at your own risk.

6. Checking Texas Instruments IMGLIB (C64x+ Image Library) version Required version: 2.0.1 or later Required for : CRL block replacement Your Version : 2.1.0.0 ### Setting environment variable "C64XP_IMGLIB_INSTALLDIR" to "C:\ti\c64plus-imglib_2_02_00_00"

7. Checking NDK (NDK 2.00) version Required version: 2.00.00 or later Required for : External mode and Ethernet blocks Your Version : NOT FOUND The required version of NDK is not found in C:\ti\ndk_2_20_00_19 Following environment variable(s) required for code generation could not be set: ### "NDK_EVMC6748_INSTALLDIR"

8. Checking C674x DSP/BIOS PSP Drivers (BIOS PSP Release version 01.30.00.05) version Required version: 1.30.00.05 Required for : Code generation / device drivers Your Version : 1.30.01 ### Setting environment variable "PSP_EVMC6748_INSTALLDIR" to "C:\ti\pspdrivers_01_30_01" The version found for "C674x DSP/BIOS PSP Drivers" differs from the one used for our software validation. Use it at your own risk.

9. Checking EDMA3 Low Level Driver (EDMA3 LLD 01.10) version Required version: 1.10.00 or later Required for : Device drivers Your Version : 01.11.03 ### Setting environment variable "EDMA3LLD_BIOS5_INSTALLDIR" to "C:\ti\edma3_lld_01_11_03_01"

10. Checking OMAP-L138/C6747EVM BSL (OMAP-L138 / TMS320C6748 / AM1808 SOM-M1 Gel, CCS Setup, & BSL Files (CCS v4.2.4)) version Required version: 2.0.0 or later Required for : Device drivers Your Version : 2.3.2 ### Setting environment variable "BSL_EVMC6748_INSTALLDIR" to "C:\ti\CCSv4-2-4_with_SOM-M1_BSL_WS"

;------------------------------------------------------------------------------------------------------

Here it is for the * XMakefile User Configuration * at Matlab Command Window :

Template: gmake Configuration: ticcs_c6000_ccsv5_clone User Templates: C:\Users\bisp\Documents\MATLAB\CodeGeneration02\ User Configurations: C:\Users\bisp\Documents\MATLAB\CodeGeneration02\

Under Make Utility: Make utility: C:\Program Files\MATLAB\R2014b\bin\win64\gmake Arguments:-f "[|||MW_XMK_GENERATED_FILE_NAME[R]|||]" [|||MW_XMK_ACTIVE_BUILD_ACTION_REF|||]

Under Compiler: Compiler: C:/ti/ccsv5/tools/compiler/c6000_7.4.8/bin/cl6x Arguments: -I"C:/ti/ccsv5/tools/compiler/c6000_7.4.8/include" -I"C:/ti/OMAPL138_CSL/include" -fr"[|||MW_XMK_DERIVED_PATH_REF|||]"

Under Linker: Linker: C:/ti/ccsv5/tools/compiler/c6000_7.4.8/bin/cl6x Arguments:-o [|||MW_XMK_GENERATED_TARGET_REF|||] -I"C:/ti/bios_5_42_01_09/packages/ti/pmi/lib/pmi.a674" -I"C:/ti/bios_5_42_01_09/packages/ti/pmi/lib/pmi_ctl_null.a674" -I"C:/ti/bios_5_42_01_09/packages/ti/bios/lib/pwrm.a674" -I"C:/ti/bios_5_42_01_09/packages/ti/pscl/lib/pscl.a674" -I"C:/ti/bios_5_42_01_09/packages/ti/pscl/lib/pscl_cfg_null.a674"

Under Archiver: Archiver: C:/ti/ccsv5/tools/compiler/c6000_7.4.8/bin/ar6x Arguments: -r [|||MW_XMK_GENERATED_TARGET_REF|||]

;------------------------------------------------------------------------------------------------------------

Here it is for the Simulink * Model Configuration Parameters * : Target selection System target file: idelink_ert.tlc, Language: C.

Coder Target Tool Chain Automation Bild format: Makefile, Bild action: Bild_and_execute, Overrun notification: None.

Target Hardware Resources IDE/Tool Chain: Texas Instruments CCS v5(makefile generation only).

Board: OMAP-L138/C6748 EVM, Processor: OMAP-L138, CPU Clock: 300 MHz.

;------------------------------------------------------------------------------------------------

Please help me solve the problem.

Thank you very much!

Liang