Subplot output data seen in two different window.
1 view (last 30 days)
Show older comments
How can i put these figures in same window?
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1376599/image.png)
clear all;
close all;
clc;
f=40;
v=380;
p=2;
r_1=0.31; x_1=0.5; r_2=0.155; x_2=0.25; x_m=12.5;
w_e=(f/p)*60;
v1=v/sqrt(3);
s=0:0.01:1;
for i=1:length(s)
W_r(i) = (1-s(i))*w_e
Z_in(i) = r_1 + x_1*1i + 1/(x_m*1i) + 1/( x_2*1i + r_2/s(i) )
i_1(i) = v1 / Z_in(i)
i_1_f(i) = abs(i_1(i))
pf(i) = cos( angle( i_1(i) ) )
i_2(i) = ( v1 - i_1(i) * (r_1 + x_1*1i) ) / (x_2*1i +( r_2/s(i) ) );
i_2_f(i) = abs(i_2(i));
i_m(i) = ( v1 - i_1(i) * ( r_1 + x_1*1i ) ) / ( x_m*1i );
T_m(i) = ( 3/w_e ) * ( r_2/s(i) ) * i_2_f(i)^2
P_in(i) = sqrt(3) * v * i_1_f(i) * cos( angle( i_1(i) ) )
P_out(i) = 3 * ( r_2/s(i) ) * ( 1-s(i) ) * i_2_f(i)^2
verim(i)= P_out(i) / P_in(i)
end;
for u=1:length(s)
W_ry(u) = (1-s(u))*w_e;
Z_iny(u) = (x_1 + x_2)*1i + r_2/s(u);
iy(u) = v1 / Z_iny(u);
i_f(u) = abs(iy(u));
pfy(u) = cos( angle( iy(u) ) );
T_my(u) = ( 3/w_e ) * ( r_2/s(u) ) * i_f(u)^2;
P_iny(u) = sqrt(3) * v * i_f(u) * cos( angle( iy(u) ) );
P_outy(u) = 3 * ( r_2/s(u) ) * ( 1-s(u) ) * i_f(u)^2;
verimy(u)= P_outy(u) / P_iny(u);
end;
subplot(4,2,1);
plot(W_r,T_m); grid; title('Moment-Hız (T- Eşdeğer Devre)');
xlabel('W_r'); ylabel('T_m');
subplot(4,2,2);
plot(W_r,i_1_f); grid; title('Stator Akımı-Hız(T- Eşdeğer Devre)');
xlabel('W_r'); ylabel('I_1'); legend('Stator Akımı','Location','SouthWest');
subplot(4,2,3);
plot(W_r,P_out); grid; title('cıkıs Gücü-Hız (T- Eşdeğer Devre)');
xlabel('W_r'); ylabel('P_out'); legend('P_out','Location','NorthWest');
subplot(4,2,4);
plot(W_r,verim); grid; title('Verim-Hız (T- Eşdeğer Devre)');
xlabel('W_r'); ylabel('Verim');
subplot(4,2,5);
plot(W_ry,T_my); grid; title('Moment-Hız (Yaklaşık Eşdeğer Devre)');
xlabel('W_r'); ylabel('T_m');
subplot(4,2,6);
plot(W_ry,i_f); grid; title('Stator Akımı-Hız (Yaklaşık Eşdeğer Devre)');
xlabel('W_r'); ylabel('I'); figure;
subplot(4,2,7);
plot(W_ry,P_outy); grid; title('cıkıs Gücü-Hız (Yaklaşık Eşdeğer Devre)');
xlabel('W_r'); ylabel('P_out'); legend('P_out','Location','NorthWest');
subplot(4,2,8);
plot(W_ry,verimy); grid; title('Verim-Hız (Yaklaşık Eşdeğer Devre)');
xlabel('W_r'); ylabel('Verim');
0 Comments
Answers (2)
Cris LaPierre
on 7 May 2023
Remove the figure command from your code here:
plot(W_ry,i_f); grid; title('Stator Akımı-Hız (Yaklaşık Eşdeğer Devre)');
xlabel('W_r'); ylabel('I'); figure; % <---------------- Here
subplot(4,2,7);
the cyclist
on 7 May 2023
On this line of your code
xlabel('W_r'); ylabel('I'); figure;
the figure command is creating a new figure window. Don't call that figure command.
See Also
Categories
Find more on Data Import and Analysis in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!