Using 'parsim' with a group of parameters
4 views (last 30 days)
Show older comments
Good afternon, i have 3 tables with a set of parameters (each table has a different number of parameters) that I want to simulate in parallel with the parsim command. I have managed to extract the data and create the groups to simulate but at the moment of using parsim, either all the commands do not appear or they appear mixed.
I still don't seem to fully understand how to use the commands to simulate in parallel.
The parameters are fixed, i.e. they are not a range.
Thanks in advance
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1391439/image.png)
0 Comments
Answers (1)
Vijeta
on 15 Jun 2023
Edited: Vijeta
on 15 Jun 2023
Hi,
Here's an example of how you can use `parsim` to simulate different sets of parameters in parallel using MATLAB.
Assuming you have three tables of parameters, `table1`, `table2`, and `table3`, each with a different number of parameters and the function you want to evaluate for each set of parameters is `myFunction`:
% Initialize tables of parameters
table1 = readtable('table1.csv');
table2 = readtable('table2.csv');
table3 = readtable('table3.csv');
% Combine tables into a cell array of tables
paramTables = {table1, table2, table3};
% Define the number of simulations to run
numSims = length(paramTables);
% Initialize results variable
results = cell(numSims, 1);
% Create parallel pool
parpool();
% Evaluate function for each set of parameters in parallel
parfor i = 1:numSims
results{i} = myFunction(paramTables{i}, otherInputs);
end
% Close parallel pool
delete(gcp);
In this example, the `readtable` functions load data from CSV files into MATLAB tables. These tables are then combined into a cell array called `paramTables` which serves as input to the `parsim` function.
The `parfor` loop evaluates the `myFunction` function for each set of parameters in parallel, where `otherInputs` is a variable containing any additional inputs required by the function.
The results are stored in a cell array called `results`. Note that the results are stored as a cell array because each set of parameters may have a different number of output variables or different sizes of output variables.
Finally, the parallel pool is closed with the `delete(gcp)` command.
0 Comments
See Also
Categories
Find more on Run Multiple Simulations in Help Center and File Exchange
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!