Unable to create project in xilinx vivado 2015.2 from simulink using hdl workflow adviser,Getting error [12-172],how can get pass this?

Hi,

I am trying to run HDL work flow adviser for the standard LED blink example from MATLAB. I am new to this style of programming FPGA, can someone advice me what to do or where I can find a solution. This is the following error:

Failed
INFO: [Ipptcl 7-578] No Compatible Board Interface found.Board Tab not created
VHDL Output written to : C:/MATLAB Saved files/hdl_prj/vivado_ip_prj/vivado_prj.srcs/sources_1/bd/system_top/hdl/system_top.vhd
VHDL Output written to : C:/MATLAB Saved files/hdl_prj/vivado_ip_prj/vivado_prj.srcs/sources_1/bd/system_top/hdl/system_top_wrapper.vhd
Wrote  : <C:/MATLAB Saved files/hdl_prj/vivado_ip_prj/vivado_prj.srcs/sources_1/bd/system_top/system_top.bd> 
make_wrapper: Time (s): cpu = 00:00:04 ; elapsed = 00:00:05 . Memory (MB): peak = 390.328 ; gain = 123.043
# regsub -all "system_top.vhd" [get_files system_top.vhd] "system_top_wrapper.vhd" TOPFILEPATH
# add_files -norecurse $TOPFILEPATH
ERROR: [Vivado 12-172] File or Directory 'Saved' does not exist
INFO: [Common 17-206] Exiting Vivado at Thu Mar 30 11:54:46 2017...

Elapsed time is 11.1759 seconds.

[Walter Roberson]

There is no point worrying about 12-172 until you have fixed 7-578 No Compatible Board Interface found

[Ariz Wakil]

Why am i getting that error (7-578). Is it because when i type z=zynq, the reply comes with an ip adress only and no serial port? Does this mean my Board is not configured properly for serial communication ? It was able to connect when i used putty.

[Walter Roberson]

Sorry, I do not have any experience with that.

You might need to contact Mathworks Support

Answer 1

[Kiran Kintali]

https://www.mathworks.com/help/hdlcoder/ug/using-ip-core-generation-from-matlab.html

Generate Custom HDL IP Core for Blinking LED on FPGA Board

[Rizwan]

I am unable to generate the bit file for the specified project.Kindly can you guide what can be possible reason

[Rizwan]

Running embedded system build outside MATLAB.

Please check external shell for system build progress.

Nothing happens after this.