ADI RF SOM (2x2) Carrier Support in Communications Toolbox Support Package for Xilinx Zynq-Based Radio
12 views (last 30 days)
Show older comments
Anton Zhivchikov
on 3 Feb 2020
Commented: Francisco Salomon
on 6 Feb 2020
Is ADRV-PackRF (https://wiki.analog.com/resources/eval/user-guides/pzsdr/carriers/packrf) Supported in Communications Toolbox Support Package for Xilinx Zynq-Based Radio?
ADRV-PackRF is a developing kit based on ADI RF SOM (2x2).
I tried to run the kit according to the instructions.
I create boot SD card ( as described in https://www.mathworks.com/help/supp=
ortpkg/xilinxzynqbasedradio/ug/manual-host-radio-hardware-setup.html )
When I uboot my equipment i see in Zynq UART console:
#############
U-Boot 2017.01 (Aug 26 2019 - 10:27:06 +0100)
Model: Zynq PicoZed SDR2 Board
Board: Xilinx Zynq
I2C: ready
DRAM: ECC disabled 1 GiB
MMC: sdhci@e0100000: 0 (SD)
reading uboot.env
In: serial@e0001000
Out: serial@e0001000
Err: serial@e0001000
Model: Zynq PicoZed SDR2 Board
Board: Xilinx Zynq
Net: ZYNQ GEM: e000b000, phyaddr 7, interface rgmii-id
eth0: ethernet@e000b000
Hit any key to stop autoboot: 0
Device: sdhci@e0100000
Manufacturer ID: 74
OEM: 4a60
Name: USD
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 14.9 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
reading uEnv.txt
** Unable to read file uEnv.txt **
Loading bitstream from SD/MMC/eMMC to RAM..
Device: sdhci@e0100000
Manufacturer ID: 74
OEM: 4a60
Name: USD
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 14.9 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
reading system.bit
13321511 bytes read in 1113 ms (11.4 MiB/s)
design filename =3D "system_top;UserID=3D0XFFFFFFFF;Version=3D2018.2"
part number =3D "7z035ifbg676"
date =3D "2019/04/03"
time =3D "23:38:59"
bytes in bitstream =3D 13321404
zynq_align_dma_buffer: Align buffer at 10006b to fff80(swap 1)
Copying Linux fro
###############
0 Comments
Accepted Answer
Francisco Salomon
on 5 Feb 2020
Hello Anton,
The ADRV-PackRF is not supported by Mathworks's hardware support packages.
Please have a look on the ADI Transceiver Toolbox to see if that suits you:
Thanks,
Francisco
2 Comments
More Answers (0)
See Also
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!