polyspace metrics - Multiple user at a time
1 view (last 30 days)
Show older comments
I configured polyspace metrics server on build pc with server name as its IP and PortNum as default.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/539461/image.png)
i am trying to do the same on another pc(slave pc). I configure server name as IP of build PC and port as 12427. I am not able to open metrics either directly through web browser or through polyspace --> metrics---> open metrics.
i started polyspace metrics server on both PCs before trying above step.
0 Comments
Accepted Answer
Anirban
on 8 Mar 2021
You should stop the Metrics server running on the slave.
You can also check a few things:
1) Are you able to ping the build server from the slave? Otherwise, there is a problem to fix there.
3 Comments
Anirban
on 11 Mar 2021
Edited: Anirban
on 11 Mar 2021
You can use the ping command on the command line of your slave and see if the communication with the server works (that is, you are getting bytes of data from the server), or if there are errors. This is a simple check to see if a firewall is preventing communication between the machine you consider as the slave and the build server.
ping servername
or
ping serveripaddress
You can also use telnet on the command line of your slave and see if the port on the build server is accessible. The basic command syntax is simply:
telnet servername portnumber
or
telnet serveripaddress portnumber
If there are no errors and a new command window opens, you can consider that the port is open. Note that in Windows, you will have to explicitly enable the Telnet Client. See examples here, for instance.
If either of these fail, then you will have to take up the issue with your IT administrator. Otherwise, there is more investigation required about what might be happening.
More Answers (0)
See Also
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!