Simulink Support Package for Arduino Hardware
Run models on Arduino boards.
835 Downloads
Updated 12 May 2021
Simulink® Support Package for Arduino® hardware will empower you with the latest Model-Based Design technology to create embedded systems on Arduino, from simulation to implementation.
Contents
- Automated Build, Deployment, and Execution
- Library of Simulink blocks for Arduino peripherals like ADC, PWM, Serial, I2C, SPI
- Communicate with Hardware in Normal Mode Simulation Using Connected I/O mode
- Real-Time parameter tuning and signal acquisition using External mode
- Examples focused on different application domains like Control systems, Robotics, Signal Processing, IoT
- Guide to create custom device driver Simulink block for Arduino library
- Code Verification and Validation with Processor-In-the-Loop (PIL) using Embedded Coder®
Documentation
Features
- Capture data using Sensor blocks
- Peripheral Library
- Support for communication protocols
- Supports programming Arduino Engineering Kit and Arduino Engineering Kit Rev 2
- Guide to create custom device driver block for Arduino Library
- Communicate with Hardware in Normal Mode Simulation Using Connected I/O
- Simulink Coder™ lets you access the C code generated from Simulink and trace it back to the original model.
- Embedded Coder® lets you generate optimized code, use code replacement libraries, and perform software-in-the-loop and processor-in-the-loop verification.
To know more about the supported Arduino boards and other features, visit - Arduino Support from Simulink
Examples
- Simulink® Support Package for Arduino® hardware allows you to model, simulate, and deploy a wide range of applications to Arduino hardware. These example models illustrate a variety of applications, from simple to complex.
Blogs
Support
- Installation FAQs: The most frequently asked questions about installation of Simulink Arduino support package
If you have download or installation problems, please contact - Technical Support
Notes
- For MATLAB R2017a and earlier versions, this support package is currently unable to download third-party software. For details and workaround, see this Bug Report. MATLAB R2017b and later versions are unaffected.
Getting Started
- Run Models Interactively on Arduino and Raspberry Pi
- Simulink IO on Arduino
- Deploy Algorithms to Arduino Using MATLAB Function Blocks in Simulink
- Classroom Ready Projects with the Arduino Engineering Kit
- Build Something! MATLAB and Simulink for Hardware Projects
- Teaching Dynamics and Control with Arduino Based TCLab
- Build a Solar Tracking System Using Simulink and ThingSpeak for Arduino
Comments and Ratings (338)
MATLAB Release Compatibility
Created with
R2014a
Compatible with R2014a to R2021a
Platform Compatibility
Windows macOS LinuxCategories
Tags
Acknowledgements
Inspired: Autonomous 4-Wheel Robot Light Tracker - Arduino Mega 2560, Device Drivers, Simulink Library for Zumo Robot
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!Discover Live Editor
Create scripts with code, output, and formatted text in a single executable document.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
Select web siteYou can also select a web site from the following list:
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)
Unable to download related library
@James Mulford: The issue suggests there could be an issue with the MATLAB installation. Could you please try reinstalling MATLAB and the Simulink support package for Arduino. If the problem persists after reinstallation, kindly contact MathWorks Technical support for further assistance.
@Iman Kousheshrani: The current Simulink support package has support only for the Arduino Nano 33 BLE Sense. Until we officially support the Arduino Nano 33, you could select Arduino Nano 33 BLE Sense in the hardware settings and proceed with development for your Arduino Nano 33 BLE board.
@Mohamed Ibrahem: Could you please share more details of the issue that you are facing. Any error message/logs that you encounter during installation or when using the support package, would be of great help to diagnose the issue.
i have matlab 16b and this package doesnt work in this version , can you solve this problem
Hi to select a board i can not find Nano 33 BLE
can you please help me
Hello, can you please help with this error I encountered during hardware setup and also when I tried building and deploying simulink code onto my Arduino Uno:
Top model targets built:
Model Action Rebuild Reason
=================================================================
Code1 Failed Code generation information file does not exist.
0 of 1 models built (0 models already up to date)
Build duration: 0h 0m 19.559s
The following error occurred during deployment to your hardware board:
Attempt to execute SCRIPT isNETSupported as a function:
C:\Program Files\MATLAB\R2020b\toolbox\matlab\winfun\NET\+NET\isNETSupported.m
@Liong Han,
Based on the log you have posted, the installation is not complete or corrupted.
The full path to the compiler is missing in the build command:
<Expected full path>/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics
Expected full path:
C:\ProgramData\MATLAB\SupportPackages\R2019a\3P.instrset\arduinoide.instrset\arduino-1.8.1\hardware\tools\avr\bin
Please reinstall the support package and try deploying the model.
Hi Matlab Technical Support, below the log when I try to connect simulink with arduino. Can you please help me find out what is the problem? Thank you.
### Generating code into build folder: D:\matlab\testing_ert_rtw
### Invoking Target Language Compiler on testing.rtw
### Using System Target File: C:\Program Files\MATLAB\R2019a\rtw\c\ert\ert.tlc
### Loading TLC function libraries
### Initial pass through model to cache user defined code
### Caching model source code
### Writing header file testing_types.h
### Writing header file testing.h
### Writing source file testing.c
### Writing header file rtwtypes.h
.
### Writing header file testing_private.h
### Writing source file testing_data.c
### Writing header file rtmodel.h
### Writing source file ert_main.c
### TLC code generation complete.
### Evaluating PostCodeGenCommand specified in the model
### Using toolchain: Arduino AVR
### 'D:\matlab\testing_ert_rtw\testing.mk' is up to date
### Building 'testing': "C:\PROGRA~1\MATLAB\R2019a\bin\win64\gmake" -f testing.mk all
D:\matlab\testing_ert_rtw>cd .
D:\matlab\testing_ert_rtw>if "" == "" ("C:\PROGRA~1\MATLAB\R2019a\bin\win64\gmake" -f testing.mk all ) else ("C:\PROGRA~1\MATLAB\R2019a\bin\win64\gmake" -f testing.mk )
arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"MW_arduino_digitalio.dep" -MT"MW_arduino_digitalio.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=testing -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=testing -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -ID:/matlab -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019a/toolbox/target/SUPPOR~1/ARDUIN~2/include -ID:/matlab/testing_ert_rtw -IC:/PROGRA~1/MATLAB/R2019a/extern/include -IC:/PROGRA~1/MATLAB/R2019a/simulink/include -IC:/PROGRA~1/MATLAB/R2019a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2019a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2019a/rtw/c/ert -Iarduino-1.8.1/hardware/arduino/avr/cores/arduino -Iarduino-1.8.1/hardware/arduino/avr/variants/standard -Iarduino-1.8.1/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019a/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019a/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include -Iarduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019a/toolbox/target/shared/EXTERN~1/include -o MW_arduino_digitalio.o C:/ProgramData/MATLAB/SupportPackages/R2019a/toolbox/target/supportpackages/arduinobase/src/MW_arduino_digitalio.cpp
'arduino-1.8.1' is not recognized as an internal or external command,
operable program or batch file.
gmake: *** [MW_arduino_digitalio.o] Error 1
D:\matlab\testing_ert_rtw>echo The make command returned an error of 2
The make command returned an error of 2
D:\matlab\testing_ert_rtw>exit 1
### Creating HTML report file testing_codegen_rpt.html
@Diego Leite : The log that is posted appears to be incomplete. To try and resolve the third party failure, could you please delete folder "C:\Users\<userName>\Downloads\MathWorks\SupportPackages\R2018b" and retry the installation. <userName> would be the user name of your account on your host machine. Make sure there are no spaces in your user name.
@MOSTAFA SOLIMAN: Sorry to hear about the problems that you are facing. In order to help resolve this, could you please provide a few more details about your workflow. Are you running the Simulink model in Normal Simulation or in External mode? In R2019a, a new communication interface for external mode namely "XCP on Serial", " XCP on TCP/IP" and " XCP on WiFi" have been introduced. In case you are running the model in external mode, is your interface set to either of the two new options?
For changing the communication interface, Go to "Model Config set --> Hardware Implementation --> Target hardware resources -->External Mode" group.
Kindly help with providing the above details for further assistance.
Same thing here MOSTAFA SOLIMAN. I'm super disappointed with this sumulink support package. Is more than a month and nothing is working and I can't find answers here. I'm using the R2019b version of Matlab and the same crap bugs continues but nobody helpes me. Because all of these problems I will give one star as avaliation about Mathworks support team.
I am not sure if this the right place to report bugs.
I am very disappointed and frustrated that push buttons from SIMULINK dashboards does not work with the arduino simulink support package anymore.
It used to work flawlessly with Matlab 2018a. Now with 2020b, the same file is not working any more :(
Can't install the Third party package. This is what appears in the log file. I'm trying to intall the simulink support package on Matlab R2018b. If somebody could help I'll apreciate a lot.
mar 11, 2021 03:47:43) ##################################################################
(mar 11, 2021 03:47:43) #
(mar 11, 2021 03:47:43) # Today's Date:
(mar 11, 2021 03:47:43) Thu Mar 11 03:47:43 BRT 2021
(mar 11, 2021 03:47:43)
(mar 11, 2021 03:47:43) System Info
(mar 11, 2021 03:47:43) OS: Windows 10 10.0
(mar 11, 2021 03:47:43) Arch: amd64
(mar 11, 2021 03:47:43) Data Model: 64
(mar 11, 2021 03:47:43) Language: pt
(mar 11, 2021 03:47:43) Java Vendor: Oracle Corporation
(mar 11, 2021 03:47:43) Java Home: C:\Program Files\MATLAB\R2018b\sys\java\jre\win64\jre
(mar 11, 2021 03:47:43) Java Version: 1.8.0_152
(mar 11, 2021 03:47:43) Java VM Name: Java HotSpot(TM) 64-Bit Server VM
(mar 11, 2021 03:47:43) Java Class Path: Skipped
(mar 11, 2021 03:47:43) User Name: diego
(mar 11, 2021 03:47:43) Current Directory: C:\Users\diego\OneDrive\Documentos\MATLAB
(mar 11, 2021 03:47:43) Initializing session 7cc616eb-e635-480d-907d-64b095b7360a
(mar 11, 2021 03:47:43) isDesktopSupported: true
(mar 11, 2021 03:47:44) In cacheParameters()
(mar 11, 2021 03:47:44) QueryParams{inputfile='', matlabroot='', workflowType='ADDONSINSTALL', downloadfolder='', installfolder='null', basecode=[ARDUINO], entryPoint='toolstrip', entryPointKey='1c7d584c-0aca-4229-98ea-5870d3385bb0', archiveLocation=''}
(mar 11, 2021 03:47:44) MATLAB root: C:\Program Files\MATLAB\R2018b
(mar 11, 2021 03:47:44) Download folder: C:\Users\diego\Downloads\MathWorks\SupportPackages\R2018b
(mar 11, 2021 03:47:44) Installation folder: C:\ProgramData\MATLAB\SupportPackages\R2018b
(mar 11, 2021 03:47:48) Starting local product/component search in download directory
(mar 11, 2021 03:47:48) Searching for archives...
(mar 11, 2021 03:47:48) C:\Users\diego\AppData\Local\Temp\ssi_dws_2799904048845447586\archives doesn't exist ... skipping.
(mar 11, 2021 03:47:48) Reading C:\Users\diego\AppData\Local\Temp\ssi_dws_2799904048845447586
(mar 11, 2021 03:47:48) Assembling product list...
(mar 11, 2021 03:47:48) 0 files found in C:\Users\diego\AppData\Local\Temp\ssi_dws_2799904048845447586
(mar 11, 2021 03:47:48) Archive search complete. 0 total files found.
(mar 11, 2021 03:47:48) Completed local product/component search
(mar 11, 2021 03:47:48) Retrieving product data
(mar 11, 2021 03:47:49) Preparing for installation
(mar 11, 2021 03:47:52) Completed local product/component search
(mar 11, 2021 03:47:53) Completed local product/component search
(mar 11, 2021 03:47:53) Completed local product/component search
(mar 11, 2021 03:47:53) Completed local product/component search
(mar 11, 2021 03:47:53) Completed local product/component search
(mar 11, 2021 03:47:53) Completed local product/component search
(mar 11, 2021 03:47:53) Completed local product/component search
(mar 11, 2021 03:47:53) Completed local product/component search
(mar 11, 2021 03:47:54) Completed local product/component search
(mar 11, 2021 03:47:54) Completed local product/component search
(mar 11, 2021 03:47:54) Completed local product/component search
(mar 11, 2021 03:47:55) Completed local product/component search
(mar 11, 2021 03:47:55) Completed local product/component search
(mar 11, 2021 03:47:55) Completed local product/component search
(mar 11, 2021 03:47:55) Completed local product/component search
(mar 11, 2021 03:47:55) Completed local product/component search
(mar 11, 2021 03:47:56) Completed local product/component search
(mar 11, 2021 03:47:56) Completed local product/component search
(mar 11, 2021 03:47:56) Completed local product/component search
(mar 11, 2021 03:47:56) Completed local product/component search
(mar 11, 2021 03:47:56) Completed local product/component search
(mar 11, 2021 03:47:56) Completed local product/component search
(mar 11, 2021 03:47:56) Completed local product/component search
(mar 11, 2021 03:47:56) Completed local product/component search
(mar 11, 2021 03:47:57) Completed local product/component search
(mar 11, 2021 03:47:57) Completed local product/component search
(mar 11, 2021 03:47:57) Completed local product/component search
(mar 11, 2021 03:47:59) Exiting with status 0
(mar 11, 2021 03:47:59) End - Successful.
(mar 11, 2021 03:48:17) Starting local product/component search in download directory
(mar 11, 2021 03:48:17) Assembling product list...
(mar 11, 2021 03:48:17) Searching for archives...
(mar 11, 2021 03:48:17) Reading C:\Users\diego\Downloads\MathWorks\SupportPackages\R2018b\archives
(mar 11, 2021 03:48:17) 80 files found in C:\Users\diego\Downloads\MathWorks\SupportPackages\R2018b\archives
(mar 11, 2021 03:48:17) Archive search complete. 80 total files found.
(mar 11, 2021 03:48:18) Completed local product/component search
(mar 11, 2021 03:48:18) Retrieving product data
(mar 11, 2021 03:48:18) Preparing for installation
(mar 11, 2021 03:48:22) Completed local product/component search
(mar 11, 2021 03:48:22) Completed local product/component search
(mar 11, 2021 03:48:22) Completed local product/component search
(mar 11, 2021 03:48:23) Completed local product/component search
(mar 11, 2021 03:48:23) Completed local product/component search
(mar 11, 2021 03:48:23) Completed local product/component search
(mar 11, 2021 03:48:23) Completed local product/component search
(mar 11, 2021 03:48:23) Completed local product/component search
(mar 11, 2021 03:48:24) Completed local product/component search
(mar 11, 2021 03:48:24) Completed local product/component search
(mar 11, 2021 03:48:24) Completed local product/component search
(mar 11, 2021 03:48:25) Completed local product/component search
(mar 11, 2021 03:48:25) Completed local product/component search
(mar 11, 2021 03:48:25) Completed local product/component search
(mar 11, 2021 03:48:26) Completed local product/component search
(mar 11, 2021 03:48:26) Completed local product/component search
(mar 11, 2021 03:48:26) Completed local product/component search
(mar 11, 2021 03:48:26) Completed local product/component search
(mar 11, 2021 03:48:26) Completed local product/component search
(mar 11, 2021 03:48:26) Completed local product/component search
(mar 11, 2021 03:48:27) Completed local product/component search
(mar 11, 2021 03:48:27) Completed local product/component search
(mar 11, 2021 03:48:27) Completed local product/component search
(mar 11, 2021 03:48:27) Completed local product/component search
(mar 11, 2021 03:48:28) Completed local product/component search
(mar 11, 2021 03:48:28) Completed local product/component search
(mar 11, 2021 03:48:28) Completed local product/component search
(mar 11, 2021 03:48:31) Exiting with status 0
(mar 11, 2021 03:48:31) End - Successful.
(mar 11, 2021 03:48:31) Start - Get updated values from notification
(mar 11, 2021 03:48:34) Finished - Get updated values from notification
Hi Khaled, can you try building the model in some other folder?
And please contact technical support for a quick response.
I have the Arduino Engineering Kit Rev 2 and using MATLAB R2020b and I received the following error when deploying the code for designing a Motor Control System (simple design using a Sine Wave Generator, 1-D Lookup Table, a gain, and a scope with an M3 M4 Motor block. This code is deployed on an Arduino Nano 33 IoT.
### Starting build procedure for: untitled_restored_from_autosave
"### Generating static library."
"C:/Program Files/MATLAB/R2020b/bin/win64/gmake" -j5 -C "C:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/staticmakefiles" SHELL="%SystemRoot%/system32/cmd.exe" -f samdcomm.mk all
gmake[1]: Entering directory `C:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/staticmakefiles'
"### Successfully generated libcomm.a library."
gmake[1]: Leaving directory `C:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/staticmakefiles'
"C:/Program Files/MATLAB/R2020b/bin/win64/gmake" -j5 -C "C:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/staticmakefiles" SHELL="%SystemRoot%/system32/cmd.exe" -f samdcore.mk all
gmake[1]: Entering directory `C:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/staticmakefiles'
"### Successfully generated libcore.a library."
gmake[1]: Leaving directory `C:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/staticmakefiles'
"C:/Program Files/MATLAB/R2020b/bin/win64/gmake" -j5 SHELL="%SystemRoot%/system32/cmd.exe" -f "untitled_restored_from_autosave.mk" all
gmake[1]: Entering directory `C:/Users/elmal/AppData/Roaming/MathWorks/MATLAB Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2/untitled_restored_from_autosave_ert_rtw'
"C:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-none-eabi-g++" -std=gnu++11 -fno-threadsafe-statics -fno-rtti -fno-exceptions -Os -c -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -DARDUINO=10801 -MMD -MP -MF"MW_PWM.dep" -MT"MW_PWM.o" -MMD -mcpu=cortex-m0plus -fpermissive -DF_CPU=48000000L -DARDUINO_SAMD_NANO_33_IOT -DARDUINO_ARCH_SAMD -D__SAMD21G18A__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x8057 -DUSBCON -DUSB_MANUFACTURER=\""Arduino LLC\"" -DUSB_PRODUCT=\""Arduino NANO 33 IoT\"" -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_NANO33_IOT_ -DCRYSTALLESS -DARDUINO_VIRTUAL_COM_PORT -DARDUINO_WIFI_LIB_NINA -DARDUINO_NUM_SERIAL_PORTS=2 -DARDUINO_ARM_CORTEX_M0_PLUS -DARDUINO_ARM -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=10 -DMW_PRESCALAR=512 -DMW_TIMERCOUNT=3125 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_ANALOG_REF_=0 -DNANO_MOTOR_CARRIER -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=1 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=untitled_restored_from_autosave -DNUMST=2 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/elmal/AppData/Roaming/MATHWO~1/MATLAB Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2 -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/shared/svd/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/include -IC:/Users/elmal/AppData/Roaming/MATHWO~1/MATLAB Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2/untitled_restored_from_autosave_ert_rtw -IC:/PROGRA~1/MATLAB/R2020b/extern/include -IC:/PROGRA~1/MATLAB/R2020b/simulink/include -IC:/PROGRA~1/MATLAB/R2020b/rtw/c/src -IC:/PROGRA~1/MATLAB/R2020b/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2020b/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2020b/toolbox/coder/rtiostream/src -IC:/PROGRA~1/MATLAB/R2020b/toolbox/coder/rtiostream/src/utils -IC:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/tools/CMSIS/4.5.0/CMSIS/Include -IC:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL -IC:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/hardware/samd/1.8.4/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/hardware/samd/1.8.4/variants/nano_33_iot -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinotarget/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/armcortexmbase/scheduler/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/shared/externalmode_daemon/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/armcortexmbase/xcp/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/hardware/samd/1.8.4/libraries/Wire -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/hardware/samd/1.8.4/libraries/SPI -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/libraries/Servo/src/samd -o "MW_PWM.o" "C:/ProgramData/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/src/MW_PWM.cpp"
"C:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-none-eabi-gcc" -std=gnu11 -Os -c -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -DARDUINO=10801 -MMD -MP -MF"MW_PWMDriver.dep" -MT"MW_PWMDriver.o" -MMD -mcpu=cortex-m0plus -fpermissive -DF_CPU=48000000L -DARDUINO_SAMD_NANO_33_IOT -DARDUINO_ARCH_SAMD -D__SAMD21G18A__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x8057 -DUSBCON -DUSB_MANUFACTURER=\""Arduino LLC\"" -DUSB_PRODUCT=\""Arduino NANO 33 IoT\"" -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_NANO33_IOT_ -DCRYSTALLESS -DARDUINO_VIRTUAL_COM_PORT -DARDUINO_WIFI_LIB_NINA -DARDUINO_NUM_SERIAL_PORTS=2 -DARDUINO_ARM_CORTEX_M0_PLUS -DARDUINO_ARM -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=10 -DMW_PRESCALAR=512 -DMW_TIMERCOUNT=3125 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_ANALOG_REF_=0 -DNANO_MOTOR_CARRIER -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 arm-none-eabi-g++: error: Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2: No such file or directory
-DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=1 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=untitled_restored_from_autosave -DNUMST=2 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/elmal/AppData/Roaming/MATHWO~1/MATLAB Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2 -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/shared/svd/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/include -IC:/Users/elmal/AppData/Roaming/MATHWO~1/MATLAB Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2/untitled_restored_from_autosave_ert_rtw -IC:/PROGRA~1/MATLAB/R2020b/extern/include -IC:/PROGRA~1/MATLAB/R2020b/simulink/include -IC:/PROGRA~1/MATLAB/R2020b/rtw/c/src -IC:/PROGRA~1/MATLAB/R2020b/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2020b/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2020b/toolbox/coder/rtiostream/src -IC:/PROGRA~1/MATLAB/R2020b/toolbox/coder/rtiostream/src/utils -IC:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/tools/CMSIS/4.5.0/CMSIS/Include -IC:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL -IC:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/hardware/samd/1.8.4/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/hardware/samd/1.8.4/variants/nano_33_iot -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinotarget/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/armcortexmbase/scheduler/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/shared/externalmode_daemon/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/armcortexmbase/xcp/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/hardware/samd/1.8.4/libraries/Wire -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/hardware/samd/1.8.4/libraries/SPI -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/libraries/Servo/src/samd -o "MW_PWMDriver.o" "C:/ProgramData/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/src/MW_PWMDriver.c"
arm-none-eabi-g++: error: Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2/untitled_restored_from_autosave_ert_rtw: No such file or directory
"C:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-none-eabi-g++" -std=gnu++11 -fno-threadsafe-statics -fno-rtti -fno-exceptions -Os -c -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -DARDUINO=10801 -MMD -MP -MF"ArduinoPinHandleMap.dep" -MT"ArduinoPinHandleMap.o" -MMD -mcpu=cortex-m0plus -fpermissive -DF_CPU=48000000L -DARDUINO_SAMD_NANO_33_IOT -DARDUINO_ARCH_SAMD -D__SAMD21G18A__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x8057 -DUSBCON -DUSB_MANUFACTURER=\""Arduino LLC\"" -DUSB_PRODUCT=\""Arduino NANO 33 IoT\"" -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_NANO33_IOT_ -DCRYSTALLESS -DARDUINO_VIRTUAL_COM_PORT -DARDUINO_WIFI_LIB_NINA -DARDUINO_NUM_SERIAL_PORTS=2 -DARDUINO_ARM_CORTEX_M0_PLUS -DARDUINO_ARM -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=10 -DMW_PRESCALAR=512 -DMW_TIMERCOUNT=3125 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_ANALOG_REarm-none-eabi-gcc: error: Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2: No such file or directory
F_=0 -DNANO_MOTOR_CARRIER -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=1 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=untitled_restored_from_autosave -DNUMST=2 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/elmal/AppData/Roaming/MATHWO~1/MATLAB Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2 -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/shared/svd/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/include -IC:/Users/elmal/AppData/Roaming/MATHWO~1/MATLAB Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2/untitled_restored_from_autosave_ert_rtw -IC:/PROGRA~1/MATLAB/R2020b/extern/include -IC:/PROGRA~1/MATLAB/R2020b/simulink/include -IC:/PROGRA~1/MATLAB/R2020b/rtw/c/src -IC:/PROGRA~1/MATLAB/R2020b/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2020b/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2020b/toolbox/coder/rtiostream/src -IC:/PROGRA~1/MATLAB/R2020b/toolbox/coder/rtiostream/src/utils -IC:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/tools/CMSIS/4.5.0/CMSIS/Include -IC:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/tools/CMSIS-Atmel/1.2.0/CMSIS/Device/ATMEL -IC:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/hardware/samd/1.8.4/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/hardware/samd/1.8.4/variants/nano_33_iot -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinotarget/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/armcortexmbase/scheduler/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/shared/externalmode_daemon/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/armcortexmbase/xcp/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/hardware/samd/1.8.4/libraries/Wire -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/portable/packages/arduino/hardware/samd/1.8.4/libraries/SPI -IC:/PROGRA~3/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/libraries/Servo/src/samd -o "ArduinoPinHandleMap.o" "C:/ProgramData/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/src/ArduinoPinHandleMap.cpp"
arm-none-eabi-gcc: error: Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2/untitled_restored_from_autosave_ert_rtw: No such file or directory
gmake[1]: *** No rule to make target `Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2/untitled_restored_from_autosave_ert_rtw/rtGetInf.c', needed by `rtGetInf.o'. Stop.
gmake[1]: *** Waiting for unfinished jobs....
gmake[1]: *** [MW_PWM.o] Error 1
gmake[1]: *** [MW_PWMDriver.o] Error 1
arm-none-eabi-g++: error: Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2: No such file or directory
arm-none-eabi-g++: error: Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2/untitled_restored_from_autosave_ert_rtw: No such file or directory
gmake[1]: *** [ArduinoPinHandleMap.o] Error 1
gmake[1]: Leaving directory `C:/Users/elmal/AppData/Roaming/MathWorks/MATLAB Add-Ons/Toolboxes/Arduino_Engineering_Kit_Project_Files_Rev_2/untitled_restored_from_autosave_ert_rtw'
gmake: *** [all] Error 2
The make command returned an error of 2
### Build procedure for untitled_restored_from_autosave aborted due to an error.
I found a workaround where I change the Current Folder path to a path without any spaces (C:\Users\xxxx\AppData\Roaming\MathWorks) instead of the usual work path (C:\Users\xxxx\AppData\Roaming\MathWorks\MATLAB Add-Ons\Toolboxes\Arduino_Engineering_Kit_Project_Files_Rev_2) - notice "MATLAB Add-Ons". Is there a proper fix for this?
i have installed the simulink support package for arduino in MATLAB R2020b. I seem to cannot find the "build" button to transfer the simulink into arduino. Usually in previous versions, the "build" button is at the front of the simulink panel. Can someone please help me?
@Bo Liu. Any issues related to the MATLAB/Support package installations are logged into a file located in your temp directory. You can refer to this link to know more about how to access the file.
https://www.mathworks.com/matlabcentral/answers/101927-where-are-the-matlab-installation-and-activation-log-files-located#:~:text=During%20the%20installation%20and%20activation,called%20%22mathworks_%25username%25.
Once you identify the file, navigate to the end of the file to know more about the error related to the third party installation failure. You can post the contents of the error for us to help you better,
One of the major causes for third party installation failures is related to the firewall settings of your computer, Kindly review it and attempt to retry the installation.
Hope this helps.
Failed to download the third-party software. how to solve this problem???
@MathWorks Simulink Team
It is so easy - when somebody tells you know to do it. Everything up and running, many thanks Team!
Failed to download the third-party software:
Ostermiller Circular Buffer
This is required by:
Simulink Support Package for Arduino Hardware
To resolve this issue, see this MATLAB Answer.
how to solve this problem???
@Josechu,
For Simulink Arduino support package in R2020b release, the required "SAMD" version is 1.8.4. It is not compatible with other versions of "SAMD" package.
Follow the below steps to revert the SAMD version from 1.8.9 to 1.8.4
1. Go to /Users/xxxx/Documents/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/arduino-1.8.10 folder.
2. Launch Arduino app
3. In the Arduino IDE, go to Tools --> Board: "XXXXX" --> Boards Manager...
4. In the opened Boards Manager screen, search for "SAMD". This will list the "Arduino SAMD Boards (32-bits ARM Cortex-M0+)" package at the top of search results.
5. In the "Select version" list, select 1.8.4 and click Install.
6. Once the installation is complete, Close the Arduino app.
7. Try deploying the model.
@Josechu Carballedo: The Support packages require a specific version of Arduino tools. As you mention, if the installed Arduino tools are 1.8.9, the support package would not work.
Did you happen to manually upgrade the version of the "samd" library?
You can try re-installing the supportpackages to revert to the required versions of the tools.
Please give it a try and let us know.
You can contact MathWorks technical support for further assistance.
Thanks,
Mohith Prabhu
Following the Arduino Engineering Kit Rev. 2 lessons (https://engineeringkit.arduino.cc/aekr2/module/engineering/lesson/03-introduction-to-mechatronics), when I try to used Monitor & Tune with the Nano 33 IoT board, I get this error:
### Starting build procedure for: SimulinkModelPrueba
### Generating static library.
"/Applications/MATLAB_R2020b.app/bin/maci64/gmake" -j3 -C "/Users/xxxx/Documents/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/staticmakefiles" SHELL="/bin/sh" -f samdcomm.mk all
gmake[1]: Entering directory `/Users/xxxx/Documents/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/staticmakefiles'
gmake[1]: *** No rule to make target `/Users/xxxxx/Documents/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/samd/1.8.4/libraries/SPI/SPI.cpp', needed by `/Users/xxxx/Documents/MATLAB/R2020b/ArduinoStaticLibrary/ArduinoNano33IoT/FasterRuns/SPI.o'. Stop.
gmake[1]: Leaving directory `/Users/xxxx/Documents/MATLAB/SupportPackages/R2020b/toolbox/target/supportpackages/arduinobase/staticmakefiles'
gmake: *** [all] Error 2
### Build procedure for SimulinkModelPrueba aborted due to an error.
I've also note that the required root actually exists but refered to version 1.8.9, that is:
`/Users/xxxx/Documents/MATLAB/SupportPackages/R2020b/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/samd/1.8.9
How could I resolve this version issue?
Running MATLAB R2020b Update 3, MATLAB Support Package for Arduino Hardware 20.2.0, Simulink Support Package for Arduino Hardware 20.2.2, in OSX Mojave 10.14.6.
Thks.
@na zimai : From the error log, the problem appears to be with the support package installation. To confirm this, could you please execute the following command in the MATLAB command prompt and let us know its output
>> codertarget.arduinobase.internal.getTpPkgRootDir('Arduino software')
Recommendation for the next update: digital inputs on analog inputs.
Seeing as for Arduinos allow analog pins to be configured as digital inputs, the fact you cannot configure the digital input block to do such is quite irritating.
i installed it sucessfully on matlab 2016b,follow this link
https://www.youtube.com/watch?v=nOz3uTi20Jo
arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"MW_arduino_digitalio.dep" -MT"MW_arduino_digitalio.o" -Os -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_MEGA2560_ -DMODEL=arduino_gettingstarted -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=100000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduino_gettingstarted -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Nazimai/Documents/MATLAB/Examples/R2019a/arduino/GettingStartedWithArduinoRHardwareExample -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019a/toolbox/target/SUPPOR~1/ARDUIN~2/include -IC:/Users/Nazimai/Documents/MATLAB/Examples/R2019a/arduino/GettingStartedWithArduinoRHardwareExample/arduino_gettingstarted_ert_rtw -IC:/PROGRA~1/POLYSP~1/R2019a/extern/include -IC:/PROGRA~1/POLYSP~1/R2019a/simulink/include -IC:/PROGRA~1/POLYSP~1/R2019a/rtw/c/src -IC:/PROGRA~1/POLYSP~1/R2019a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/POLYSP~1/R2019a/rtw/c/ert -Iarduino-1.8.1/hardware/arduino/avr/cores/arduino -Iarduino-1.8.1/hardware/arduino/avr/variants/mega -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019a/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019a/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include -Iarduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019a/toolbox/target/shared/EXTERN~1/include -o MW_arduino_digitalio.o C:/ProgramData/MATLAB/SupportPackages/R2019a/toolbox/target/supportpackages/arduinobase/src/MW_arduino_digitalio.cpp
'arduino-1.8.1' 不是内部或外部命令，也不是可运行的程序
或批处理文件。
gmake: *** [MW_arduino_digitalio.o] Error 1
The make command returned an error of 2
Build failed: The third-party library files may be corrupted. Uninstall the support package, reinstall it and launch this hardware setup process again.
problem during installation:
Failed to install the third-party software:
* Arduino Modbus Library
This is required by
* Simulink support Package for Arduino Hardware"
the analog inputs show maximum value all the time
Edit: After today's Windows 10 update everything works!
Similar issue on Win10, Matlab 2020b:
"Install Error
Failed to install the third-party software:
* Arduino Modbus Library
This is required by
* Simulink support Package for Arduino Hardware"
Same issue in Win10, M2020a
Unable to download third party software-------Ostermiller Circular Buffer！！
My "Rensselaer Arduino Support Package" seems to be missing
Hi Kathleen, Portenta H7 is not supported as of now.
Does this work with Portenta H7?
Same issue in Win10, M2020b
Unable to download third party software
Hi,
Workaround for Nano 33 IoT setup screen issue has been posted on the following link:
https://www.mathworks.com/matlabcentral/answers/615833-hardware-setup-is-failing-during-test-connection-for-nano-33-iot-while-running-simulink-support-pack
Thanks,
Arun
Hey,
same problem. When I try to install I get the message "There was a problem downloading the support package. To resolve this issue, see this MATLAB Answer". My Matlab Version is R2020b. I tried to install the Add On without a Firewall and still got the same error message. What can I do?
Same issue in Win10, M2020b
Unable to download third party software-------Ostermiller Circular Buffer！！
Mac 2020b software installation seems to be fixed... thanks!
I am also having the same issues with the hardware setup for Nano33 IoT... sounds like it is in work though... thanks in advance!
Can someone please help with this error:
C:\Users\arshd\tut13K04_ert_rtw>exit 0
### Build procedure for tut13K04 aborted due to an error.
The following error occurred during deployment to your hardware board:
Failed to download the binary 'C:\Users\arshd\tut13K04.bin' to the board.
Bro, people be saying the issue has been fixed but nothing is fixed here, if i contact the support team they say i must run MATLAB as admin, even if thats the case i still get the same problem, this is pure frustration
Unable to download third party software-------Ostermiller Circular Buffer！！！
Thanks Arun. Looking forward to your update on the fix for Nano33 IoT
Hi Andile,
There was a web service outage on 7th Oct 2020, because of which the support package installer was failing.
Please try installing the support package again and if you face the same issue, please contact technical support.
Thanks,
Arun
HI Arun
Please help i still have the same problem when trying to download this addd-on in a Windows 10 PC, R2019b Update 7
error "failure to download third party software ostermiller circular buffer"
Please help, its been more than a week trying to install this
Hi Sam,
The error "There was a problem downloading the support package" is resolved now. Please try to install the support package again.
There's an issue with the hardware setup on Mac which is giving the download error during hardware setup only for Nano 33 IoT board.
Please skip the hardware setup and continue with model deployment.
I'll update here once we have the fix for the issue.
Thanks,
Arun
Hi Arun, I need help.
I'm running this add-on on mac.
The board I have is Arduino Nano 33 IoT
I was able to install the add-on on the 5th. but it failed the "Test Connection Step".
I did uninstall the add-on. Now I can't install again. I get the "There was a problem downloading the support package. To resolve this issue, see this MATLAB Answer" message
Hi Guillermo, which Arduino board are you trying to work on?
Can you try running an example model and see if that works for you?
I have the same problem, can you help me Arun
Uninstalled the add-on. I can't install it again. I get the same message I used to get a few days ago.
"There was a problem downloading the support package. To resolve this issue, see this MATLAB Answer"
Hi Philip,
Please use the contact icon on my profile to send the log file.
Also, which board are you trying to work on?
Hi Arun, where would you like me to send the log file to?
Hi Phillip, can you share the installation log file.
Please follow this link to know the location of log files:
https://in.mathworks.com/matlabcentral/answers/101927-where-are-the-matlab-installation-and-activation-log-files-located
I have the same issue as Sam:
I was able to download the add-on on my mac today. I wasn't able to do this a couple of days ago. However, there is still an issue when I get to the hardware setup and "Test Connection" step. It passes the "Build status" but it fails the "Download Status", when downloading applications. Download Failed. I followed all the checking steps in the "Test Connection" page. I even uninstalled the add-on, then re-installed it. Still getting "Download Failed" when I go to Test Connection step.
Unable to download third party software-------Ostermiller Circular Buffer！！！
I was able to download the add-on on my mac today. I wasn't able to do this a couple of days ago. However, there is still an issue when I get to the hardware setup and "Test Connection" step. It passes the "Build status" but it fails the "Download Status", when downloading applications. Download Failed. I followed all the checking steps in the "Test Connection" page. I even uninstalled the add-on, then re-installed it. Still getting "Download Failed" when I go to Test Connection step.
Fix for the Simulink Arduino support package installation issue on Mac and Linux platform in R2020b release is fixed and released (ver 20.2.1). Please try installing the support package.
For the Mac 2020b issue, fix will be available by Oct 6th (Tuesday).
Cannot install with Mac Catalina and 2020b. I see below that there is a fix in work... I would also like to know if there is any news about when it will be available?
Thanks!
Mac running catalina and R2020b, "Unexpected Error occured"
Failed to download the third-party software:
Ostermiller Circular Buffer
Please Help guys, i need this support package urgently
Error: "Something Unexpected Occurred", MacOS Catalina latest version runnubg R2020b. Any ideas on the ETA for this fix?
Doesn't install, Error: " Something unexpected occurred", MacOs
There's an issue in the support package because of which support package installation is failing for Mac and Linux. We are working on the fix.
Thanks
Nope...does not install: "Something unexpected occurred". The MATLAB package works fine. Tried a clean install; no joy.
Hi
Tried to install this on R2020b. Got the error message "Something Unexpected Occurred". Machine is a Mac.
Thanks.
Hi,
I am having an issue with the BNO055 IMU Sensor Block from this package using an Arduino Mega2560 and Arduino 9 Axis Motion Shield in R2020a shield so all pins are connected correctly.
I continually get "-1" on all signal status', I know this works in the Arduino IDE on the 0x28 I2C address, I've even tried the BNO055 Example from the Arduino_Engineering_Kit_Hardware_Support_18b, but still nothing.
Are there additional setting or blocks required to ensure I2C communication is actually enabled (i.e. wire.begin())?
Thanks,
Shaun
BNO055 Block: https://www.mathworks.com/help/supportpkg/arduino/ref/bno055imusensor.html?s_tid=srchtitle
Similar Question: https://www.mathworks.com/matlabcentral/answers/594811-simulink-bno055-with-arduino-mega-2560?s_tid=prof_contriblnk
siempre siempre siempre tengo problemas para instalar esto.....
I tried to Download it in 2020a, but the third-party software can not be downloaded...
Hi Mauricio,
Please have a look at the following document to get a list of the supported Arduino boards.
https://in.mathworks.com/hardware-support/arduino-simulink.html
Thanks and Regards,
Nirmal
Does this package support the new Arduino Portenta H7?
I need to use encoder read block and ethernet blocks in my project. But older version doesn't contain ethernet blocks and the newer version doesn't contain the encoder read block. How can i overcome this problem. Can you help me ?
Invalid operation. Object must be connected to the serial port.
i met this issue in Simulink. but i can do it in the script.
I got the same error massage on my Desctop and Laptop installations: Something Unexpected Occured. To resolve the issue, contact Technical Support...
It seems there is a bug in that hardware package. Whether a home license is used shouldn't be the problem, right?
Something Unexpected Occurred
To resolve this issue, contact Technical Support
-what could be wrong and how to fix this please ??
will the Arduino Nano 33 BLE be added?
What is happening is that the Third-Party Package fails to download/install. @MathWorks, please give us a hint!
Hello, I installed 2020A and still can't install, please advise
i am unable to download it, it is showing plain blank from last 5 mins
@Ivan Gromyko From the log looks like you have a custom implementation that uses SoftwareSerial. Make sure you add the required include path of the libraries that you are using.
You can refer https://www.mathworks.com/help/supportpkg/arduino/device-driver-blocks.html for more information on the creation of custom device drivers
@Ivan Gromyko Are you rtyring to build in external mode using MKR 1000?
What is it?"C:/ProgramData/MATLAB/SupportPackages/R2019b/3P.instrset/arduinoide.instrset/hardware/tools/avr/bin/avr-gcc" -std=gnu11 -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"untitled1.dep" -MT"untitled1.o" -Os -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_MEGA2560_ -DMODEL=untitled1 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -DON_TARGET_WAIT_FOR_START=1 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=5 -DMW_PRESCALAR=1024 -DMW_TIMERCOUNT=62411 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=115200 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DON_TARGET_WAIT_FOR_START=1 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=untitled1 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -ID:/matlab -ID:/matlab/untitled1_ert_rtw -IC:/PROGRA~1/MATLAB/R2019b/extern/include -IC:/PROGRA~1/MATLAB/R2019b/simulink/include -IC:/PROGRA~1/MATLAB/R2019b/rtw/c/src -IC:/PROGRA~1/MATLAB/R2019b/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2019b/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2019b/toolbox/coder/rtiostream/src -IC:/PROGRA~1/MATLAB/R2019b/toolbox/coder/rtiostream/src/utils -IC:/ProgramData/MATLAB/SupportPackages/R2019b/3P.instrset/arduinoide.instrset/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2019b/3P.instrset/arduinoide.instrset/hardware/arduino/avr/variants/mega -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019b/toolbox/target/SUPPOR~1/ARDUIN~2/include -IC:/ProgramData/MATLAB/SupportPackages/R2019b/3P.instrset/arduinoide.instrset/hardware/tools/avr/avr/include/avr -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019b/toolbox/target/shared/EXTERN~1/include -o "untitled1.o" "D:/matlab/untitled1_ert_rtw/untitled1.c"
"C:/ProgramData/MATLAB/SupportPackages/R2019b/3P.instrset/arduinoide.instrset/hardware/tools/avr/bin/avr-g++" -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"PZEM_004T_100A_wrapper.dep" -MT"PZEM_004T_100A_wrapper.o" -Os -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_MEGA2560_ -DMODEL=untitled1 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -DON_TARGET_WAIT_FOR_START=1 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=5 -DMW_PRESCALAR=1024 -DMW_TIMERCOUNT=62411 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=115200 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DON_TARGET_WAIT_FOR_START=1 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=untitled1 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -ID:/matlab -ID:/matlab/untitled1_ert_rtw -IC:/PROGRA~1/MATLAB/R2019b/extern/include -IC:/PROGRA~1/MATLAB/R2019b/simulink/include -IC:/PROGRA~1/MATLAB/R2019b/rtw/c/src -IC:/PROGRA~1/MATLAB/R2019b/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2019b/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2019b/toolbox/coder/rtiostream/src -IC:/PROGRA~1/MATLAB/R2019b/toolbox/coder/rtiostream/src/utils -IC:/ProgramData/MATLAB/SupportPackages/R2019b/3P.instrset/arduinoide.instrset/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2019b/3P.instrset/arduinoide.instrset/hardware/arduino/avr/variants/mega -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019b/toolbox/target/SUPPOR~1/ARDUIN~2/include -IC:/ProgramData/MATLAB/SupportPackages/R2019b/3P.instrset/arduinoide.instrset/hardware/tools/avr/avr/include/avr -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019b/toolbox/target/shared/EXTERN~1/include -o "PZEM_004T_100A_wrapper.o" "D:/matlab/PZEM_004T_100A_wrapper.cpp"
In file included from D:/matlab/PZEM_004T_100A_wrapper.cpp:18:0:
D:/matlab/PZEM004Tv30.h:30:10: fatal error: SoftwareSerial.h: No such file or directory
#include <SoftwareSerial.h>
^~~~~~~~~~~~~~~~~~
compilation terminated.
gmake: *** [PZEM_004T_100A_wrapper.o] Error 1
The make command returned an error of 2
Error(s) encountered while building "untitled1":
### Failed to generate all binary outputs.
Hello,
has anyone face the following error, in Arduino egineering kit example 2.3 simulink gettign started?
"C:/ProgramData/MATLAB/SupportPackages/R2019a/3P.instrset/arduinoide.instrset/idepkgs/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-none-eabi-g++ -std=gnu++11 -fno-threadsafe-statics -fno-rtti -fno-exceptions -Os -c -g -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -DARDUINO=10801 -MMD -MP -MF"MW_PWM.dep" -MT"MW_PWM.o" -MMD -mcpu=cortex-m0plus -fpermissive -DF_CPU=48000000L -DARDUINO_SAMD_MKR1000 -DARDUINO_ARCH_SAMD -D__SAMD21G18A__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x824e -DUSBCON -DUSB_MANUFACTURER=\""Unknown\"" -DUSB_PRODUCT=\""Genuino MKR1000\"" -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_MKR1000_ -DMODEL=myDCMotorControl -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -DON_TARGET_WAIT_FOR_START=1 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=9 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=18750 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_ANALOG_REF_=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DON_TARGET_WAIT_FOR_START=1 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=myDCMotorControl -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IC:/Users/Chrisrek/DROPBO~1/Work/IDeM-Prototyping/ArduinoEngineeringKit/Simulink -IC:/PROGRA~3/MATLAB/SupportPackages/R2019a/toolbox/target/shared/svd/include -IC:/Users/Chrisrek/DROPBO~1/Work/IDeM-Prototyping/ArduinoEngineeringKit/Simulink/myDCMotorControl_ert_rtw -IC:/PROGRA~1/MATLAB/R2019a/extern/include -IC:/PROGRA~1/MATLAB/R2019a/simulink/include -IC:/PROGRA~1/MATLAB/R2019a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2019a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2019a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2019a/toolbox/coder/rtiostream/src -IC:/PROGRA~1/MATLAB/R2019a/toolbox/coder/rtiostream/src/utils -IC:/ProgramData/MATLAB/SupportPackages/R2019a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/tools/CMSIS/4.5.0/CMSIS/Include -IC:/ProgramData/MATLAB/SupportPackages/R2019a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/tools/CMSIS-Atmel/1.1.0/CMSIS/Device/ATMEL -IC:/ProgramData/MATLAB/SupportPackages/R2019a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/samd/1.6.20/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2019a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/samd/1.6.20/variants/mkr1000 -IC:/PROGRA~3/MATLAB/SupportPackages/R2019a/toolbox/target/supportpackages/arduinotarget/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2019a/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2019a/toolbox/target/supportpackages/armcortexmbase/scheduler/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2019a/toolbox/target/supportpackages/arduinobase/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2019a/toolbox/target/shared/externalmode_daemon/include -IC:/PROGRA~3/MATLAB/SupportPackages/R2019a/toolbox/target/supportpackages/armcortexmbase/xcp/include -o MW_PWM.o C:/ProgramData/MATLAB/SupportPackages/R2019a/toolbox/target/supportpackages/arduinobase/src/MW_PWM.cpp
C:/ProgramData/MATLAB/SupportPackages/R2019a/toolbox/target/supportpackages/arduinobase/src/MW_PWM.cpp:6:21: fatal error: Arduino.h: No such file or directory #include "Arduino.h"
^
compilation terminated.
gmake: *** [MW_PWM.o] Error 1
The make command returned an error of 2
### Build procedure for model: 'myDCMotorControl' aborted due to an error.
Error(s) encountered while building "myDCMotorControl":
### Failed to generate all binary outputs."
It cant build the code while in external mode while using the MKR 1000.
thanks
This will not install if Arduino software is already installed on system; the failure doesn't say anything except to contact support. Once you uninstall your current installation of Arduino software/IDE (and all the awesome libraries and other stuff you setup on your computer), then this will proceed without error. Not cool. I'll have to get everything back to the way it was somehow after I use this add-on for school project.
Is it possible to add another arduino board?
I build a small board with an arduino bootloader based on atmega1284p
I can not download the support package. How to fix this problem.
下载支持包时出现问题。要解决此问题，请参阅该 MATLAB 答复，一直这个报错，下载不成功
下载支持包时出现问题。要解决此问题，请参阅该 MATLAB 答复，一直这个报错，下载不成功
我安装成功了哈哈
@Behnam Please contact Mathworks Technical Support if the problem still persists.
I'm working with matlab r2020a and arduino due R3.
Every time that I want to deploy a model from simulink to arduino, just for the first time everything is ok and after that simulink cannot find the COM Port. Indeed, after restarting the matlab I can program the board again.
Any idea?
unable to download arduino software
“Operation not supported” error while building Arduino model on MATLAB R2020a:
If the version number of Simulink Support Package for Arduino Hardware that you have installed is 20.1.0, then you might face this issue. To know the version of the installed support package, execute the following command:
matlabshared.supportpkg.getInstalled
To resolve this issue follow the instructions given below:
Replace 'user_name' with the actual username with which you are logged in and execute the following command in MATLAB command prompt.
setenv('ARDUINO_STATIC_LIB_PATH’,’/Users/user_name/Documents/MATLAB')
For more details: https://in.mathworks.com/matlabcentral/answers/514231-operation-not-supported-error-while-building-arduino-model-on-matlab-r2020a
Doesn't work when arduino build the project.Ihave the following message in simulink.
Please, have you an idea why it doesn't work
### Build procedure for model: 'test' aborted due to an error.
"/hardware/tools/avr/bin/avr-gcc" -std=gnu11 -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"test.dep" -MT"test.o" -Os -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_MEGA2560_ -DMODEL=test -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=5 -DMW_PRESCALAR=1024 -DMW_TIMERCOUNT=62411 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=test -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -ID:/MATLAB -ID:/MATLAB/test_ert_rtw -ID:/MATLAB/R2019b/extern/include -ID:/MATLAB/R2019b/simulink/include -ID:/MATLAB/R2019b/rtw/c/src -ID:/MATLAB/R2019b/rtw/c/src/ext_mode/common -ID:/MATLAB/R2019b/rtw/c/ert -I/hardware/arduino/avr/cores/arduino -I/hardware/arduino/avr/variants/mega -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019b/toolbox/target/SUPPOR~1/ARDUIN~2/include -I/hardware/tools/avr/avr/include/avr -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2019b/toolbox/target/shared/EXTERN~1/include -o "test.o" "D:/MATLAB/test_ert_rtw/test.c"
Le chemin d'accès spécifié est introuvable.
gmake: *** [test.o] Error 1
The make command returned an error of 2
Error(s) encountered while building "test":
### Failed to generate all binary outputs.
Amazing piece of gem!
Is there an offline installer for this or do I have to go to each machine and install this??
cannot download this
Not working
I downloaded this package ,but I cant seem to find the sensors nor actuators package ,only the hardware package is there. How can I solve that issue?
I can't install MATLAB Support Package for Arduino Hardware Have you some suggestions?
The selection of COM port manually for Simulink hardware support package with Arduino is not working with 2018a. Can anyone help me out ?
When will you fix the "build failed" problem?
Does not work!
They added MCP2515 CANbus support which is great. It is is not perfect and lacks documentation, but very easy to use for simple cases
Hi!
I recently downloaded this package and I'm having trouble finding external interrupt block
currently I'm using R2018b, could that be the problem?
thanks
Hi Ta Hai,
Did you make sure that you have selected Arduino Mega 2560 in Configuration Settings?
Configuration Settings >> Hardware Implementation >> Select 'Arduino Mega 2560 ' under Hardware board.
Each Arduino board supports PWM on different set of pins. The error that you are seeing is may be because no board has been selected.
-Nirmal
Hi all. I am using Arduino Mega 2560. I tried to access port PWM 44,45,46 in simulink, however, Simulink show an error "PWM block parameter Pin number must be an integer between 2 and 13". Its strange!
Can anyone help me!
No problem for Mega...
It doesn't work for Uno...when I test conecction...
fantastic information.
<a href ="https://openapkfile.co/open-xapk-file/"> open xapk file </a>
Error occurred while executing External Mode MEX-file 'ext_comm':
Failed to connect to the target. A time-out occurred while waiting for the connection response from the target. Possible reasons for the time-out:
a) The target is not switched on.
b) The target is not connected to your host machine.
c) The application for the model is not running on the target. You might have clicked the Stop button. If the Run button is not dimmed, click it. Otherwise, click the Build button, which downloads and runs your application on the target.
Component:Simulink | Category:Block diagram error
Unable to connect to the 'Arduino Mega 2560' target for 'Test'.
What are the errors here?
i have corrupted third party software issue. How can i solve this?
The generated code is inefficient for Arduino blocks.
Generated garbage eating valuable RAM:
typedef struct {
132 boolean_T matlabCodegenIsDeleted;
133 int32_T isInitialized;
134 boolean_T isSetupComplete;
135 real_T SampleTime;
136 f_codertarget_arduinobase_int_T *Hw;
137 MW_Handle_Type MW_ANALOGIN_HANDLE;
138 uint8_T PinAnalog;
139 } codertarget_arduinobase_inter_T;
when showing Failed to generate all binary outputs. using simulink model, just save your model in matlab folder in C drive and open from there, then simulate and generate, it did work for me. Technical reason i don't know, but it works for me.
the build test repeatedly fails. i have tryed uninstalling and re instaling, any sugestions
Cannot even download it. Stuck on third party issue
Cannot even download it. Stuck on third party issue.
horrible
Hi all i just managed to solve the problems in using the Simulink Support Package for Arduino Hardware for MatlabR2019a.
Here are the steps/methods that you can follow:
1. If you have previous version of Matlab, uninstall it first.
2. Delete the hidden program data for the previous Matlab which contains the support packages for the Simulink-Arduino.
The location for the HIDDEN program data folder for Matlab is is at C: ProgramData. Delete the Matlab folder.
2. Restart your latest version of Matlab as the administrator.
3. Install your add-on package for Simulink-Arduino as usual.
4. Once its done, you need to install the MinGW-w64 C/C++ compiler. You can find this in the add-on explorer page of your matlab.
5. Once its done, your need to make sure the enviroment variables is having the path for this support package folder in the hidden program data folder. To do so, Right click Computer Icon> Advanced system settings> Enviroment Variables. Take a look at the section for user variables for user. There is a 'PATH' variable. Click Edit, and then make sure that the variable value is C:\ProgramData\MATLAB\SupportPackages\R2019a....
6. You should be able to use the Simulink Support Package after following this steps.
I believe the steps should be the same for those whom are using the 2018a/2018b versions.
I have problems to donwload Simulink Support Package for Arduino Hardware, Please help me.
If you have problems installing the Simulink Support Package for Arduino, please try installing first the MATLAB Support Package for Arduino and this one later.
Everytime I try to compile, the final diagnosis always shows "### Failed to generate all binary outputs", I re-installed the package several times but still showing the same error. It seems to not have downloaded the whole buch of files because the error explains that certain files are not located in the proper folders. Please fix this. Thanks
How to solve this problem "Build failed: The third-party library files may be corrupted. Uninstall the support package, reinstall it and launch this hardware setup process again". I tried more than once and failed
I have some VERY STRONG words to tell to the person that decided that it was a good idea for this Add-on to replace the compiler I had installed for the ESP32 and Arduino boards with an outdated version of them, only for it to fail to compile my projects and cause me to spend an hour trying to fix it.
Im stuck on "third party download"
one thing doesnt work after another
Hi, I am trying to install the package on Matlab R2018a and I am getting "Build failed" message immidiatly after "Testing Connection" in the "Hardware Setup" Wizard.
It is mentioned:
"The third-part library files may be corrupted. Uninstall the support package, reinstall it and launch this hardware setup process again"
I tried this for 5 times without success.
I am not sure what is wrong!
I would appreciate your help.
Always getting the message ##I nstall folder error // This folder name is invalid. Folder names can contain alphanumeric characters and '-', '_', '.', or '/' only. The destination folder cannot be named "private" ## when trying to download on my mac (R2018b and R2019a). What can I do? No workaround was working.
Is it possible to add individual SPI modes for every SPI module?
i have a problem withe Support Package for Arduino uno Hardware is ' Error(s) encountered while building "mehdipfa":
### Failed to generate all binary outputs. ' i m using matlab2017a
hi,how to change arduino pwm frequency using simulink pwm block?can you help me?
HI Sieme,
Since you have Arduino Engineering Kit installed, i assume you are programming Arduino MKR1000 board.
Please check if SAMD package version 1.6.18 is installed correctly in the below mentioned path for 18b release:
C:\ProgramData\MATLAB\SupportPackages\R2018b\3P.instrset\arduinoide.instrset\idepkgs\packages\arduino\hardware\samd\1.6.18.
Arduino.h will be present in C:\ProgramData\MATLAB\SupportPackages\R2018b\3P.instrset\arduinoide.instrset\idepkgs\packages\arduino\hardware\samd\1.6.18\cores\arduino folder.
Please go through the Hardware Setup workflow for Arduino MKR1000 to verify if the build environment is correct. Follow these steps:
1. Launch MATLAB.
2. In the MATLAB Toolstrip, click on "Add-Ons --> Manage Add-Ons" to open "Add-On" manager.
3. In "Add-On" manager, click on the gear icon of the "Simulink Support package for Arduino Hardware". Hardware Setup app will open. Follow the instructions on the HW setup screens to verify MKR1000 build is happening correctly.
Also please post the build log present on the diagnostic viewer.
How do you fix this? (already tried the un-install and re-install procedure, it doesn't change anything)
C:\ProgramData\MATLAB\SupportPackages\R2018b\toolbox\target\supportpackages\arduinobase\src\MW_arduinoI2C.cpp(8): fatal error C1083: Cannot open include file: 'Arduino.h': No such file or directory
Windows 10, Matlab R2018b
Installed packages:
Matlab coder
Matlab support for MinGW-w64 C/C++
Simulink Coder 9.0
Simulink Support Package for Arduino Hardware 18.2.0
Matlab Support Package for Arduino Hardware 18.2.0
Arduino_Engineering_kit_hardware_Support 18b 1.1.1
this is a clean install that doesn't work straight out of the box...
Hi Gareth,
Please try the below steps to fix Download Error while installing the MATLAB and Simulink Arduino Support package:
1. Go to folder location "C:\Users\<user id>\Downloads\MathWorks\SupportPackages" on your machine.
2. Delete all the old support package files and folders. Make sure the folder is empty.
3. Try installing Support package from Add-On Manager.
I am unable to download or install support packages from the add on explorer and file share. This is my error. Please help
Download Error
There was a problem downloading the support package. To resolve this issue, see this MATLAB Answer
@Scott Thomas, @Gertsch enzo: Are you facing installation problem or issue deploying a model? Please post the error description
Previous version worked for me. This version does not.
doesn't work
For anybody still getting this error:
home/gilgamesh007/Documents/MATLAB/SupportPackages/R2018b/toolbox/target/supportpackages/arduinobase/src/MW_PWM.cpp:6:21: fatal error: Arduino.h: No such file or directory
#include "Arduino.h"
^
compilation terminated.
gmake: *** [MW_PWM.o] Error 1
### Build procedure for model: 'myDCMotorControl' aborted due to an error.
Error:Error(s) encountered while building "myDCMotorControl":
### Failed to generate all binary outputs.
Please see this:
https://www.mathworks.com/matlabcentral/answers/407753-arduino-mkr1000-simulink-build-procedure-aborted-due-to-error
and
https://www.mathworks.com/matlabcentral/fileexchange/68620-arduino_engineering_kit_hardware_support_18b?s_tid=FX_rc2_behav
Hi!
I'm experiencing strange issue with this package. I'm running Matlab 2017b and WIN 10 on my computer and after installation of this package, i can see only half of the hardware I/O available in simulink library for arduino. For instance i have Analog Read block, but i don't have an equivalent ANALOG WRITE...
Is anybody having similar issue?
i try win 7 it worked and win 10 not work
ready thanks..
Try downloading with Windows 7 and not with Windows 10. At least it worked for me.
como puedo instalar de forma manual los paquetes
My email id is rahidten@gmail.com
Third Party download does not work. Please fix it.
Third Party download does not work. I dl'ed it from the Ostermiller homepage. Where do I need to install the three.jar-files?
I am having trouble finding the arduino uno on the hardware implementation when I try to run my simple simulink code. Can anyone tell me why I cannot see the different arduino boards on the drop down?
Hi,
I am trying to implement PID controller (programmed in Simulink) on a real plant (system) using Arduino Uno.
I have only MATLAB and Simulink license. Do I need MATLAB/Simulink or Embedded Coder License to use Arduino Uno ?
Installation seem like to work fine, but when I try "test installation" on MKR1000 board on step 1 "Build checks if the third-party tools are installed appropriately." says: build failed "The third-party library files may be corrupted. Uninstall the support package, reinstall it and launch this hardware setup process again."
Can not install it - doesn't go past "third-party" download. Get's stuck at 100% and throws an error. I'm using R2018b.
ThingSpeak Write/Read Blocks are not working in the latest version with the MKR1000 Arduino.
The installation stops when reach "third-party" part. I'm using R2018b. Do not know what to do!
Works great and I am using this to teach a class with 30+ students controlling an Arduino Due. Initial install, setup and familiarization takes a little while but once you get it going, things run smoothly.
In case it is helpful, I made a video documenting how to get started with this support package. This includes installing and implementing Mathwork's workaround for earlier versions of Matlab. The video is at https://youtu.be/nOz3uTi20Jo.
Impossible de faire le téléchargement !
the third package have problem. what should i do ? i can't install it. Please fix it
Hi,
I have installed the above package to run arduino with simulink and also have installed mex setup. But when I deploy my code to the hardware, I get the following error.
### Generating code into build folder: C:\Users\admin\Lab_1_ert_rtw
### Invoking Target Language Compiler on Lab_1.rtw
### Using System Target File: C:\Program Files\MATLAB\R2017a\rtw\c\ert\ert.tlc
### Loading TLC function libraries
### Initial pass through model to cache user defined code
.
### Caching model source code
### Writing header file Lab_1.h
### Writing header file Lab_1_types.h
### Writing source file Lab_1.c
### Writing header file rtwtypes.h
.
### Writing header file Lab_1_private.h
### Writing source file Lab_1_data.c
### Writing header file rtmodel.h
### Writing source file ert_main.c
### TLC code generation complete.
### Evaluating PostCodeGenCommand specified in the model
### Using toolchain: Arduino AVR v1.6.13 | gmake (64-bit Windows)
### 'C:\Users\admin\Lab_1_ert_rtw\Lab_1.mk' is up to date
### Building 'Lab_1': "C:\PROGRA~1\MATLAB\R2017a\bin\win64\gmake" -f Lab_1.mk all
C:\Users\admin\Lab_1_ert_rtw>cd .
C:\Users\admin\Lab_1_ert_rtw>if "" == "" ("C:\PROGRA~1\MATLAB\R2017a\bin\win64\gmake" -f Lab_1.mk all ) else ("C:\PROGRA~1\MATLAB\R2017a\bin\win64\gmake" -f Lab_1.mk )
C:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10613 -MMD -MP -MF"MW_digitalio.dep" -MT"MW_digitalio.o" -Os -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_MEGA2560_ -DMODEL=Lab_1 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=5 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=34286 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Lab_1 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -IC:/Users/admin -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/include -IC:/PROGRA~1/MATLAB/R2017a/simulink/include/sf_runtime -IC:/Users/admin/Lab_1_ert_rtw -IC:/PROGRA~1/MATLAB/R2017a/extern/include -IC:/PROGRA~1/MATLAB/R2017a/simulink/include -IC:/PROGRA~1/MATLAB/R2017a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2017a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2017a/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/variants/mega -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/shared/externalmode_daemon/include -o MW_digitalio.o C:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/src/MW_digitalio.cpp
The system cannot find the path specified.
gmake: *** [MW_digitalio.o] Error 1
C:\Users\admin\Lab_1_ert_rtw>echo The make command returned an error of 2
The make command returned an error of 2
C:\Users\admin\Lab_1_ert_rtw>An_error_occurred_during_the_call_to_make
'An_error_occurred_during_the_call_to_make' is not recognized as an internal or external command,
operable program or batch file.
### Creating HTML report file Lab_1_codegen_rpt.html
### Build procedure for model: 'Lab_1' aborted due to an error.
Error(s) encountered while building "Lab_1":
### Failed to generate all binary outputs.
What should I do?
Could not install it succesfully with 2018b
I can not install the package because of the following reason:
Failed to download the third-party software:
Ostermiller Circular Buffer
Can anyone help me?
Error installing third party package Arduino software: Invalid zip file "C:\MATLAB\SupportPackages\R2013a\downloads\arduino-1.0-windows.zip".
Should I of known to upload the MKR1000 WiFi101 before " Select Arduino/MKRMotorCarrier and RotaryEncoder . Click Program. " ?
I was seeing errors until I installed the WiFi101 from Arduino IDE..
HI I need some help
When I deploy a simulink model to my arduino Uno. I met a big error as follow.
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"arduinowork.dep" -MT"arduinowork.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o arduinowork.o arduinowork.c
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"arduinowork_data.dep" -MT"arduinowork_data.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o arduinowork_data.o arduinowork_data.c
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-gcc -MMD -MP -MF"wiring_pulse.S.dep" -MT"wiring_pulse.S.o" -Wall -x assembler-with-cpp -c -g -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO=10801 -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o wiring_pulse.S.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/wiring_pulse.S
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"hooks.dep" -MT"hooks.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o hooks.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/hooks.c
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"WInterrupts.dep" -MT"WInterrupts.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o WInterrupts.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/WInterrupts.c
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"wiring.dep" -MT"wiring.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o wiring.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/wiring.c
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"wiring_analog.dep" -MT"wiring_analog.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o wiring_analog.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/wiring_analog.c
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"wiring_digital.dep" -MT"wiring_digital.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o wiring_digital.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/wiring_digital.c
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"wiring_pulse.dep" -MT"wiring_pulse.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o wiring_pulse.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/wiring_pulse.c
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"wiring_shift.dep" -MT"wiring_shift.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o wiring_shift.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/wiring_shift.c
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"abi.dep" -MT"abi.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o abi.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/abi.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"CDC.dep" -MT"CDC.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o CDC.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/CDC.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"HardwareSerial.dep" -MT"HardwareSerial.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o HardwareSerial.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/HardwareSerial.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"HardwareSerial0.dep" -MT"HardwareSerial0.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o HardwareSerial0.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/HardwareSerial0.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"HardwareSerial1.dep" -MT"HardwareSerial1.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o HardwareSerial1.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/HardwareSerial1.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"HardwareSerial2.dep" -MT"HardwareSerial2.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o HardwareSerial2.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/HardwareSerial2.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"HardwareSerial3.dep" -MT"HardwareSerial3.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o HardwareSerial3.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/HardwareSerial3.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"PluggableUSB.dep" -MT"PluggableUSB.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o PluggableUSB.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/PluggableUSB.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"IPAddress.dep" -MT"IPAddress.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o IPAddress.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/IPAddress.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"new.dep" -MT"new.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o new.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/new.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"Print.dep" -MT"Print.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o Print.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/Print.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"Stream.dep" -MT"Stream.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o Stream.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/Stream.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"Tone.dep" -MT"Tone.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o Tone.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/Tone.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"USBCore.dep" -MT"USBCore.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o USBCore.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/USBCore.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"WMath.dep" -MT"WMath.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/matlabwork -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/include -IC:/Users/孙士奇/DOCUME~1/MATLAB/Add-Ons/COLLEC~1/SIMULI~1/code/arduino/blocks/sfcn/include -ID:/matlabwork/arduinowork_ert_rtw -IH:/extern/include -IH:/simulink/include -IH:/rtw/c/src -IH:/rtw/c/src/ext_mode/common -IH:/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o WMath.o C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino/WMath.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"WString.dep" -MT"WString.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=arduinowork -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=200000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT
Hi TZU-I Huang,
The following page may help you:
https://www.mathworks.com/matlabcentral/answers/318635-how-do-i-perform-a-clean-re-installation-of-a-support-package
Good luck,
Antonin.
Can not install this add-on with all the methods for 2018a where third party installation errors still occur.
Will not install for 2018a, yet if it gets past the first stage of installation it will not read the build and ask you to uninstall and reinstall. Please help
@Hassan:
The below video is very informative as well.
https://in.mathworks.com/videos/install-the-matlab-and-simulink-support-packages-for-arduino-106497.html
@Hassan Nawazish:
1) You can download it from this page and install it using the instructions found on this documentation page under "Install Add-Ons Manually": https://www.mathworks.com/help/matlab/matlab_env/get-add-ons.html
2) You can also search for "simulink arduino" on the Add-On Explorer, which you can open by following the instructions on the documentation page above. The first search result should be the "Simulink Support Package for Arduino Hardware", which is the same add-on as on this File Exchange submission.
I would recommend using the installation process #2.
Can anybody tell me how to download & install simulink package for Arduino in MATLAB R2018.
Arduino Engineering Kit, the new kit from Arduino in partnership with MathWorks, is all set to hit the market! Get more details at https://blog.arduino.cc/2018/05/12/arduino-goes-to-college-with-the-new-arduino-engineering-kit/
https://www.mathworks.com/campaigns/products/arduino-kit.html
The components of the kit can be assembled to three projects:
1. Self-Balancing Motorcycle: This motorcycle will maneuver on its own on various terrains and remain upright using a flywheel for balance.
2. Mobile Rover: This vehicle can navigate between given reference points, move objects with a forklift, and much more.
3. Whiteboard Drawing Robot: This amazing robot can take a drawing it's given and replicate it on a whiteboard.
Guess what, the kit also includes a one-year individual license for MATLAB and Simulink :)
Grab a kit for yourself: https://store.arduino.cc/usa/arduino-engineering-kit
This kit is already in news, see:
https://www.sensorsmag.com/components/collaborators-offer-arduino-engineering-kit-for-students
https://www.electronicsweekly.com/news/business/527674-2018-05/
Are you using this hardware support package for a project? Check out the Maker Community to discuss hardware projects. https://www.mathworks.com/matlabcentral/discussions/maker/46-simulink-support-package-for-arduino-hardware
R2016b users, it appears that one third party tool (Ostermiller circular buffer) is now redirecting to a secured server that uses a certificate that the default R2016b MATLAB installation doesn't have.
This leads to installation errors where you see a pop-up advising you to call technical support.
The following bug report, related to the same problem affecting MinGW provides a way to fix this problem until we find a more permanent solution.
https://www.mathworks.com/support/bugreports/1507667
This only affects R2016b, the missing certificate is part of R2017a and later releases.
I hope it helps,
Antonin.
MATLAB R2018a is out!!
We introduced Simulink IO, allowing you to instantaneously run simulation on your host computer while accessing peripherals on your Arduino board.
https://www.mathworks.com/help/releases/R2018a/supportpkg/arduino/ug/simulink-io.html
This feature gives pseudo real-time performance while used in conjunction with simulation pacing.
https://www.mathworks.com/help/releases/R2018a/simulink/ug/simulation-pacing.html
The first run of Simulink IO flashes our IO server on the Arduino board. Subsequent runs start in less than 10 seconds!
In R2018a, we also speed up the deployment by reducing subsequent build time for users without Simulink or Embedded coder license.
Enjoy!
@Prasanth I had the same problem when I upgraded from v2017b to v2018a. I followed steps below but was unable to solve by doing that alone. I had to create and set a new working directory for v2018a while also deleting the ...\SupportPackages directory.
@Prasanth: Please let us know the MATLAB release version and host platform where you are getting the installation error.
Mr. Pradeep KS I followed your three steps mentioned in previous information. But,still i'm facing this issue.
Fix Download Error while installing the MATLAB and Simulink Arduino Support package:
1. Go to folder location "C:\Users\<user id>\Downloads\MathWorks\SupportPackages" on your machine.
2. Delete all the old support package files and folders. Make sure the folder is empty.
3. Try installing Support package from Add-On Manager.
Download Error
There was a problem downloading the support package. To resolve this issue, see this MATLAB Answer
please help me out from this error. error occurred while trying to install simulink support package for Arduino hardware
@Adarsh: Please let us know the version of MATLAB you are using along with the error log.
its not working I cant install this package without this i cant complete engineering Project
Please can you try this:
1. Login as Administrator
2. Install MATLAB
3. Install Arduino Due support package
4. Try deploying the Arduino Due model.
Hello all,
I am just getting started with the Arduino Due and managed to get the Simulink Toolbox installed (at least it says it's installed) after many errors and trial and error it finally started working and I was able to load a test.slx file in order to do a simple test but I get about half way through the simulation and keep getting this error. It seems that I am missing a key file in my root directory. Can any one please help:
Simulation 2 2 Clear
04:18 PM Elapsed: 4 sec
### Starting build procedure for model: Arduino_test
Code Generation 1
Elapsed: 3 sec
/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/3P.instrset/idepkgs/packages/arduino/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-none-eabi-gcc -Os -c -g -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -DARDUINO=10607 -MMD -MP -MF"Arduino_test.dep" -MT"Arduino_test.o" -MD -mcpu=cortex-m3 -DF_CPU=84000000L -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON -DUSB_MANUFACTURER=\""Unknown\"" -DUSB_PRODUCT=\""Arduino Due\"" -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_DUE_ -DMODEL=Arduino_test -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DUNIX -DON_TARGET_WAIT_FOR_START=1 -DEXT_MODE=1 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=9 -DMW_TIMERCOUNT=26250 -DMW_SAM_CLOCKID=TC_CMR_TCCLKS_TIMER_CLOCK3 -D_RTT_BAUDRATE_SERIAL0_=115200 -D_RTT_BAUDRATE_SERIAL1_=115200 -D_RTT_BAUDRATE_SERIAL2_=115200 -D_RTT_BAUDRATE_SERIAL3_=115200 -D_RTT_ANALOG_REF_=0 -DEXT_MODE=1 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DON_TARGET_WAIT_FOR_START=1 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Arduino_test -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DUNIX -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/arduinotargetdemos -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/include -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/blocks/sfcn/include -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/arduinotargetdemos/Arduino_test_ert_rtw -I/Applications/MATLAB_R2017a.app/extern/include -I/Applications/MATLAB_R2017a.app/simulink/include -I/Applications/MATLAB_R2017a.app/rtw/c/src -I/Applications/MATLAB_R2017a.app/rtw/c/src/ext_mode/common -I/Applications/MATLAB_R2017a.app/rtw/c/ert -I/Applications/MATLAB_R2017a.app/toolbox/coder/rtiostream/src/utils -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/3P.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/system/libsam -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/3P.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/system/CMSIS/CMSIS/Include -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/3P.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/system/CMSIS/Device/ATMEL -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/3P.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/cores/arduino -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/3P.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/cores/arduino/avr -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/3P.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/variants/arduino_due_x -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/include -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/scheduler/include -I/Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/toolbox/target/shared/externalmode_daemon/include -o Arduino_test.o Arduino_test.c
/bin/sh: /Users/Bigred7/Documents/MATLAB/SupportPackages/R2017a/3P.instrset/idepkgs/packages/arduino/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-none-eabi-gcc: No such file or directory
gmake: *** [Arduino_test.o] Error 127
### Build procedure for model: 'Arduino_test' aborted due to an error.
Error(s) encountered while building "Arduino_test":
### Failed to generate all binary outputs.
Thanks you.
I get "Something Unexpected Occurred To resolve this issue, contact Technical Support" on R2017b
Any ideas?
I'm using Mac btw
To all those who get this long error message, starting with C:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/bin/avr-gcc
Solution: Disable your antivirus.
Hello all - In case of error messages or technical issues related to the Simulink Support Package for Arduino Hardware, you can use the MATLAB Answers forum, in which the community helps address such questions. Some issues may persist or not have an answer in the forum; in such case, you can always reach out to our Technical Support team, who will do their best to assist in addressing persisting issues: https://www.mathworks.com/support/contact_us.html
I Have a to flash my simulink model on my arduino Mega, every time I try to do it I get the Error " unable to find a register to spill in class 'POINTER_REGS ". Why does this Error appear always?
Hi Guys,
I solved the installation problem with the error massage "Installation failed, contact technical support."
Download the .zip-file "ostermillerutils-1.08.02-bin" from: https://ostermiller.org/utils/download.html .
Paste the .zip-file to \MathWorks\SupportPackages\R2016b\archives\3p .
Install the support package again.
This package will (may?) fail to install the required third party software for Matlab R2016b. The trouble seems to be a bug in the java unzip utility that MW uses to unzip the third party software. To verify that this is the case, look at the log file generated in
/tmp/mathworks_<username>.log (for linux).
If you see complaints like:
Caused by: com.mathworks.instructionset.InstructionSetException: java.util.zip.ZipException: archive is +not a ZIP archive
at com.mathworks.instructionset.InstructionSet.main(InstructionSet.java:371) Caused by: java.util.zip.ZipException: archive is not a ZIP archive
then try applying this patch:
https://www.mathworks.com/support/bugreports/1507667
NOTE: this patch sounds like it has nothing to do with the problem at hand and is only applicable to Matlab support the MinGW Compiler. This is not the case.
Mathworks really needs to get it together and DOCUMENT THIS PROBLEM IN THE PACKAGE DESCRIPTION. They say the package is functional for R2013a and beyond which is disingenuous at best.
This package is garbage.
I have tried installing on two separate machines today, one linux and one windows, and both have failed with an error message just saying "Installation failed, contact technical support."
@saiful anuar: The build process for MKR1000 should take similar time as for other Arduino boards. If you are including any blocks from Arduino WiFi library or trying External Mode over WiFi then Simulink waits to obtain the IP address from the MKR1000. This may take some time.
Can you send the benchmark: time taken to build and upload for other Arduino boards vs MKR1000?
@Gerry Stoye: Looks like the model still holds the External mode configuration. It is trying to include the files meant for External mode during deployment. You can try these:
- Set the simulation mode of the model to External.
- With your model open and active, execute >>get_param(gcs,'ExtMode'). If the result is 'on' then set it to 'off' by executing >>set_param(gcs,'ExtMode','off').
Try to deploy the model. If error still persists then:
- Goto Simulink toolbar in the model > Tools > Model Explorer > Model Hierarchy. Click on Simulink Root in the left side of the pane. Select the model name. You can see two configuration settings: Configuration and External Mode Configuration in middle pane. If you see that External Mode Configuration (Active) and in green color then right click on Configuration and click Activate. You should see Configuration (Active) and in green color. Close the Model Explorer and try to deploy the model.
@Nicole Bauer: I am assuming that you are talking about the model present in Embedded Coder Target for Arduino submission https://www.mathworks.com/matlabcentral/fileexchange/30277-embedded-coder-target-for-arduino. If you check the comments in this link you will find some suggestions such as:
- When you have message like "... does not exist", it looks that directory "blocks" is not on the MATLAB path. It should be, because it is done in function "setup_customtarget_arduino.m" on first functional line and next this path is saved:
addpath(fullfile(pwd,'arduino_ec'), fullfile(pwd,'blocks'))
result = savepath;
Try to run "setup_customtarget_arduino.m" again.
- The message "S-Function 'sfunar_digitalOutput' does not exist" means that S-Funtions were not created (compiled) during the setup. Please check/pick-up the C-compiler running of:
mex -setup
Then re-compile the S-Functions via script:
build_all_sfunctions
After that, in the directory "blocks" should be files with extension ".mexw32" resp. ".mexw64", depending on MATLAB version
I can run my model in external Mode, but when i Try to Deploy it the following Error occurs:
IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o io_wrappers.o C:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/src/io_wrappers.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"arduinoAVRScheduler.dep" -MT"arduinoAVRScheduler.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=Schwebeball_geregelt_drauf -DNUMST=2 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=1 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=64911 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=19200 -D_RTT_ANALOG_REF_=1 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=1 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Schwebeball_geregelt_drauf -DNUMST=2 -DNCSTATES=0 -DHAVESTDIO -IC:/Users/gerry/OneDrive/DOKUME~1/HOCHSC~1/SEMEST~3/REGELU~1/Projekt -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/blocks/sfcn/include -IC:/Users/gerry/OneDrive/DOKUME~1/HOCHSC~1/SEMEST~3/REGELU~1/Projekt/Schwebeball_geregelt_drauf_ert_rtw -IC:/PROGRA~1/MATLAB/R2017b/extern/include -IC:/PROGRA~1/MATLAB/R2017b/simulink/include -IC:/PROGRA~1/MATLAB/R2017b/rtw/c/src -IC:/PROGRA~1/MATLAB/R2017b/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2017b/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o arduinoAVRScheduler.o C:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/registry/../scheduler/src/arduinoAVRScheduler.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"rtiostream_interface.dep" -MT"rtiostream_interface.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=Schwebeball_geregelt_drauf -DNUMST=2 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=1 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=64911 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=19200 -D_RTT_ANALOG_REF_=1 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=1 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Schwebeball_geregelt_drauf -DNUMST=2 -DNCSTATES=0 -DHAVESTDIO -IC:/Users/gerry/OneDrive/DOKUME~1/HOCHSC~1/SEMEST~3/REGELU~1/Projekt -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/blocks/sfcn/include -IC:/Users/gerry/OneDrive/DOKUME~1/HOCHSC~1/SEMEST~3/REGELU~1/Projekt/Schwebeball_geregelt_drauf_ert_rtw -IC:/PROGRA~1/MATLAB/R2017b/extern/include -IC:/PROGRA~1/MATLAB/R2017b/simulink/include -IC:/PROGRA~1/MATLAB/R2017b/rtw/c/src -IC:/PROGRA~1/MATLAB/R2017b/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2017b/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/shared/externalmode_daemon/include -o rtiostream_interface.o C:/PROGRA~1/MATLAB/R2017b/rtw/c/src/ext_mode/common/rtiostream_interface.c
C:/PROGRA~1/MATLAB/R2017b/rtw/c/src/ext_mode/common/rtiostream_interface.c:29:30: fatal error: rtiostream_utils.h: No such file or directory
#include "rtiostream_utils.h"
^
compilation terminated.
gmake: *** [rtiostream_interface.o] Error 1
The make command returned an error of 2
Der Befehl "An_error_occurred_during_the_call_to_make" ist entweder falsch geschrieben oder
konnte nicht gefunden werden.
### Build procedure for model: 'Schwebeball_geregelt_drauf' aborted due to an error.
Error(s) encountered while building "Schwebeball_geregelt_drauf":
### Failed to generate all binary outputs.
test
I solved my problem: BitDefender Antivirus -> Disable -> Worked
I have the problem that it has a permission fail with file MW_digitalio.cpp fatal error: opening dependency file Permission denied. Has anybody the same problem and solved it ?
Build 3 1 Clear
04:49 PM Elapsed: 32 sec
### Starting build procedure for model: arduino_led
### Generating code and artifacts to 'Model specific' folder structure
Code Generation 1
Elapsed: 24 sec
### Generating code into build folder: C:\Users\Michael\Documents\MATLAB\arduino_led_ert_rtw
### Invoking Target Language Compiler on arduino_led.rtw
### Using System Target File: C:\MATLAB\R2017b\rtw\c\ert\ert.tlc
### Loading TLC function libraries
### Initial pass through model to cache user defined code
.
### Caching model source code
### Writing header file arduino_led_types.h
### Writing header file arduino_led.h
### Writing source file arduino_led.c
.
### Writing header file rtwtypes.h
### Writing header file multiword_types.h
### Writing header file rt_nonfinite.h
### Writing source file rt_nonfinite.c
### Writing header file rtGetInf.h
### Writing source file rtGetInf.c
### Writing header file rtGetNaN.h
.
### Writing source file rtGetNaN.c
### Writing header file arduino_led_private.h
### Writing header file rtmodel.h
### Writing source file arduino_led_data.c
### Writing source file ert_main.c
### TLC code generation complete.
### Evaluating PostCodeGenCommand specified in the model
### Using toolchain: Arduino AVR v1.8.1 | gmake (64-bit Windows)
### Creating 'C:\Users\Michael\Documents\MATLAB\arduino_led_ert_rtw\arduino_led.mk' ...
### Building 'arduino_led': "C:\MATLAB\R2017b\bin\win64\gmake" -f arduino_led.mk all
C:\Users\Michael\Documents\MATLAB\arduino_led_ert_rtw>cd .
C:\Users\Michael\Documents\MATLAB\arduino_led_ert_rtw>if "" == "" ("C:\MATLAB\R2017b\bin\win64\gmake" -f arduino_led.mk all ) else ("C:\MATLAB\R2017b\bin\win64\gmake" -f arduino_led.mk )
C:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"MW_digitalio.dep" -MT"MW_digitalio.o" -Os -mmcu=atmega32u4 -DF_CPU=16000000L -DARDUINO_AVR_LEONARDO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_LEONARDO_ -DUSB_VID=0x2341 -DUSB_PID=0x8036 -DUSB_MANUFACTURER=\""Unknown\"" -DUSB_PRODUCT=\""Arduino Leonardo\"" -DMODEL=arduino_led -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=3 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_ANALOG_REF_=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduino_led -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -IC:/Users/Michael/Documents/MATLAB -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/include -IC:/Users/Michael/Documents/MATLAB/arduino_led_ert_rtw -IC:/MATLAB/R2017b/extern/include -IC:/MATLAB/R2017b/simulink/include -IC:/MATLAB/R2017b/rtw/c/src -IC:/MATLAB/R2017b/rtw/c/src/ext_mode/common -IC:/MATLAB/R2017b/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/hardware/arduino/avr/variants/leonardo -IC:/ProgramData/MATLAB/SupportPackages/R2017b/3P.instrset/arduinoide.instrset/arduino-1.8.1/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinotarget/scheduler/include -o MW_digitalio.o C:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/src/MW_digitalio.cpp
C:/ProgramData/MATLAB/SupportPackages/R2017b/toolbox/target/supportpackages/arduinobase/src/MW_digitalio.cpp:35:1: fatal error: opening dependency file MW_digitalio.dep: Permission denied
}
^
compilation terminated.
gmake: *** [MW_digitalio.o] Error 1
C:\Users\Michael\Documents\MATLAB\arduino_led_ert_rtw>echo The make command returned an error of 2
The make command returned an error of 2
C:\Users\Michael\Documents\MATLAB\arduino_led_ert_rtw>An_error_occurred_during_the_call_to_make
Der Befehl "An_error_occurred_during_the_call_to_make" ist entweder falsch geschrieben oder
konnte nicht gefunden werden.
### Creating HTML report file arduino_led_codegen_rpt.html
### Build procedure for model: 'arduino_led' aborted due to an error.
Error(s) encountered while building "arduino_led":
### Failed to generate all binary outputs.
Oh, my first post is missing.
If I try to run or generate the code of the myarduino_blink_double example, following error occurs:
Error in S-function 'myarduino_blink_double/Digital Output1': S-Function 'sfunar_digitalOutput' does not exist
I'm using R2017a. Is that the problem?
Can anybody help me?
Hi,
I'm having problem using MKR1000 board. The problem is that the 'Building' time takes too long to finish uploading the simulink blocks/codes. I already check the board connection with arduino IDE and there is no problem with it, in terms of firmware
Any idea why this is happening?
Thanks
saiful
I'm using R2017a. Is that the problem?
Hi,
I am getting the following error when i try to implement the model on Arduino DUE:
### Generating code into build folder: C:\Users\Ravleen\Documents\MATLAB\2k18\arduino_led_ert_rtw
### Invoking Target Language Compiler on arduino_led.rtw
### Using System Target File: C:\Program Files\MATLAB\R2017a\rtw\c\ert\ert.tlc
### Loading TLC function libraries
### Initial pass through model to cache user defined code
.
### Caching model source code
### Writing header file arduino_led.h
### Writing header file arduino_led_types.h
### Writing source file arduino_led.c
### Writing header file rtwtypes.h
.
### Writing header file arduino_led_private.h
### Writing source file arduino_led_data.c
### Writing header file rtmodel.h
### Writing source file ert_main.c
### TLC code generation complete.
### Evaluating PostCodeGenCommand specified in the model
### Using toolchain: Arduino ARM v1.6.7 | gmake (64-bit Windows)
### 'C:\Users\Ravleen\Documents\MATLAB\2k18\arduino_led_ert_rtw\arduino_led.mk' is up to date
### Building 'arduino_led': "C:\PROGRA~1\MATLAB\R2017a\bin\win64\gmake" -f arduino_led.mk all
C:\Users\Ravleen\Documents\MATLAB\2k18\arduino_led_ert_rtw>cd .
C:\Users\Ravleen\Documents\MATLAB\2k18\arduino_led_ert_rtw>if "" == "" ("C:\PROGRA~1\MATLAB\R2017a\bin\win64\gmake" -f arduino_led.mk all ) else ("C:\PROGRA~1\MATLAB\R2017a\bin\win64\gmake" -f arduino_led.mk )
C:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-none-eabi-g++ -std=gnu++11 -fno-threadsafe-statics -fno-rtti -fno-exceptions -Os -c -g -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -DARDUINO=10607 -MMD -MP -MF"MW_digitalio.dep" -MT"MW_digitalio.o" -MD -mcpu=cortex-m3 -DF_CPU=84000000L -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON -DUSB_MANUFACTURER=\""Unknown\"" -DUSB_PRODUCT=\""Arduino Due\"" -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_DUE_ -DMODEL=arduino_led -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=9 -DMW_TIMERCOUNT=328125 -DMW_SAM_CLOCKID=TC_CMR_TCCLKS_TIMER_CLOCK4 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduino_led -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -IC:/Users/Ravleen/Documents/MATLAB/2k18 -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/include -IC:/Users/Ravleen/Documents/MATLAB/2k18/arduino_led_ert_rtw -IC:/PROGRA~1/MATLAB/R2017a/extern/include -IC:/PROGRA~1/MATLAB/R2017a/simulink/include -IC:/PROGRA~1/MATLAB/R2017a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2017a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2017a/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/system/libsam -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/system/CMSIS/CMSIS/Include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/system/CMSIS/Device/ATMEL -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/cores/arduino/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/variants/arduino_due_x -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/shared/externalmode_daemon/include -o MW_digitalio.o C:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/src/MW_digitalio.cpp
The system cannot find the path specified.
gmake: *** [MW_digitalio.o] Error 1
C:\Users\Ravleen\Documents\MATLAB\2k18\arduino_led_ert_rtw>echo The make command returned an error of 2
The make command returned an error of 2
C:\Users\Ravleen\Documents\MATLAB\2k18\arduino_led_ert_rtw>An_error_occurred_during_the_call_to_make
'An_error_occurred_during_the_call_to_make' is not recognized as an internal or external command,
operable program or batch file.
### Creating HTML report file arduino_led_codegen_rpt.html
### Build procedure for model: 'arduino_led' aborted due to an error.
Error(s) encountered while building "arduino_led":
### Failed to generate all binary outputs.
Also, I would like to inform that my command window shows that your device is connected.
Hi Syed,
I see you have space in your current working directory "D:/Matlab project". Please remove the space and try deploying the model.
I hope this is helpful.
dear mr pradeep
Help me please !!! anyone !!!
C:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10613 -MMD -MP -MF"afmotor_v2.dep" -MT"afmotor_v2.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=afmotor_v2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DARDUINO=105 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=62411 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=afmotor_v2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/Matlab project -ID:/Matlab/simulink/include/sf_runtime -ID:/Matlab project/afmotor_v2_ert_rtw -ID:/Matlab/bin -ID:/Matlab/extern/include -ID:/Matlab/simulink/include -ID:/Matlab/rtw/c/src -ID:/Matlab/rtw/c/src/ext_mode/common -ID:/Matlab/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/shared/externalmode_daemon/include -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10613 -MMD -MP -MF"afmotor_v2.dep" -MT"afmotor_v2.o" -Os -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DMODEL=afmotor_v2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DARDUINO=105 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=62411 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_ANALOG_REF_=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=afmotor_v2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/Matlab project -ID:/Matlab/simulink/include/sf_runtime -ID:/Matlab project/afmotor_v2_ert_rtw -ID:/Matlab/bin -ID:/Matlab/extern/include -ID:/Matlab/simulink/include -ID:/Matlab/rtw/c/src -ID:/Matlab/rtw/c/src/ext_mode/common -ID:/Matlab/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/shared/externalmode_daemon/include -c -o afmotor_v2.o afmotor_v2.c
avr-gcc: error: project: No such file or directory
avr-gcc: error: project/afmotor_v2_ert_rtw: No such file or directory
avr-gcc: error: project: No such file or directory
avr-gcc: error: project/afmotor_v2_ert_rtw: No such file or directory
gmake: *** [afmotor_v2.o] Error 1
The make command returned an error of 2
'An_error_occurred_during_the_call_to_make' is not recognized as an internal or external command,
operable program or batch file.
hello, I'm using Matlab 2016a to run the example file "afmotor_v2". it keeps giving me the error: "MW_target_hardware_resources.h": no such file or directory.
the .h file should be already in my computer or it should be created when i deploy the model on the hardware?
Is it can be using in the version of 2010a?
I am getting this compiling error, and the file referenced is not in the folder. Is there a reason for this, I have already downloaded the simulink Arduino DUE support package
IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/cores/arduino/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/variants/arduino_due_x -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/shared/externalmode_daemon/include -o MW_analogWriteDAC.o C:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/src/MW_analogWriteDAC.cpp
The system cannot find the path specified.
gmake: *** [MW_analogWriteDAC.o] Error 1
The make command returned an error of 2
'An_error_occurred_during_the_call_to_make' is not recognized as an internal or external command,
operable program or batch file.
### Build procedure for model: 'FilterTremolo' aborted due to an error.
Error(s) encountered while building "FilterTremolo":
### Failed to generate all binary outputs.
Hello,
when trying the 'arduino_gettingstarted' example, I receive an error:
The following error occurred during deployment to your hardware board:
Could not automatically set the bootloader COM port for your Leonardo board. This may be due to a disconnected or unrecognized board.
I use an Arduino Leonardo ETH. Is the ETH option not supported or do I have a different problem?
Thanks a lot!
Best,
Andreas
Hi Mohammad,
In case of abruptly interrupted installations, I have seen cases where reinstalling is not able to recover from the previously failing installation. One (dirty) way to fix this on Windows is to manually delete the content of the 3 following folders.
C:\Users\your_username\Downloads\MathWorks\SupportPackages\R2017b (or your version)
C:\ProgramData\MATLAB\SupportPackages\R2017b (or your version)
C:\Users\your_username\AppData\Local\Temp (or your Windows Temp folder defined by %Temp%)
DISCLAIMER: This will erase all support packages, use at your own risk, better to follow what the message says and call tech support, there is no guarantee that this will work, etc.
I hope it helps,
Antonin.
I get this message when I tried to install the package:
Hi,
"Something Unexpected Occurred
To resolve this issue, contact Technical Support
"
Can you please help me?
i got this error:
C:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10613 -MMD -MP -MF"MW_SerialWrite.dep" -MT"MW_SerialWrite.o" -Os -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_MEGA2560_ -D_RTT_USE_SERIAL2_ -D_RTT_USE_SERIAL1_ -DMODEL=Final_3DOF -DNUMST=2 -DNCSTATES=3 -DHAVESTDIO -DONESTEPFCN=1 -DTERMFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DRT -DSTACK_SIZE=64 -DMW_TIMERID=5 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=64286 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DONESTEPFCN=1 -DTERMFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=1 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DRT -DSTACK_SIZE=64 -DMODEL=Final_3DOF -DNUMST=2 -DNCSTATES=3 -DHAVESTDIO -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinobase/blocks/sfcn/include -IC:/PROGRA~1/MATLAB/R2016b/simulink/include/sf_runtime -ID:/uni_Doc/BSC_project/GCRC_MATLAB_tests/final_3dof/3DOF_Copy(2)/Final_3DOF_ert_rtw -ID:/uni_Doc/BSC_project/GCRC_MATLAB_tests/final_3dof/3DOF_Copy(2) -IC:/PROGRA~1/MATLAB/R2016b/extern/include -IC:/PROGRA~1/MATLAB/R2016b/simulink/include -IC:/PROGRA~1/MATLAB/R2016b/rtw/c/src -IC:/PROGRA~1/MATLAB/R2016b/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2016b/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/variants/mega -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinotarget/registry/../include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinotarget/registry/../scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/shared/externalmode_daemon/include -o "MW_SerialWrite.o" "C:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinobase/src/MW_SerialWrite.cpp"
C:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10613 -MMD -MP -MF"Final_3DOF.dep" -MT"Final_3DOF.o" -Os -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_MEGA2560_ -D_RTT_USE_SERIAL2_ -D_RTT_USE_SERIAL1_ -DMODEL=Final_3DOF -DNUMST=2 -DNCSTATES=3 -DHAVESTDIO -DONESTEPFCN=1 -DTERMFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DRT -DSTACK_SIZE=64 -DMW_TIMERID=5 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=64286 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_OVERRUN_DIGITAL_PIN_=13 -DONESTEPFCN=1 -DTERMFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=1 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DRT -DSTACK_SIZE=64 -DMODEL=Final_3DOF -DNUMST=2 -DNCSTATES=3 -DHAVESTDIO -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinobase/blocks/sfcn/include -IC:/PROGRA~1/MATLAB/R2016b/simulink/include/sf_runtime -ID:/uni_Doc/BSC_project/GCRC_MATLAB_tests/final_3dof/3DOF_Copy(2)/Final_3DOF_ert_rtw -ID:/uni_Doc/BSC_project/GCRC_MATLAB_tests/final_3dof/3DOF_Copy(2) -IC:/PROGRA~1/MATLAB/R2016b/extern/include -IC:/PROGRA~1/MATLAB/R2016b/simulink/include -IC:/PROGRA~1/MATLAB/R2016b/rtw/c/src -IC:/PROGRA~1/MATLAB/R2016b/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2016b/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/variants/mega -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinotarget/registry/../include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinotarget/registry/../scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/shared/externalmode_daemon/include -o "Final_3DOF.o" "Final_3DOF.c"
In file included from Final_3DOF.c:1:0:
Final_3DOF.h:264:1: error: type 'struct <anonymous>' is too large
} BlockIO_Final_3DOF;
^
gmake: *** [Final_3DOF.o] Error 1
### Build procedure for model: 'Final_3DOF' aborted due to an error.
Error(s) encountered while building "Final_3DOF":
### Failed to generate all binary outputs.
Hi Mustafa,
Simulink Arduino Support package has a new version 17.1.4 published with a fix to handle the space in the path in “Program Files”. Please make sure you are installing the latest version of Simulink Arduino support package.
Issue Description:
It looks like 8dot3 feature is disabled in your Windows 10 machine. Please refer below link for more details.
https://technet.microsoft.com/en-us/library/ff621566(v=ws.11).aspx
The DefaultValue can have the following values:
• 0: Enables 8dot3 name creation for all volumes on the system.
• 1: Disables 8dot3 name creation for all volumes on the system.
• 2: Sets 8dot3 name creation on a per volume basis.
• 3: Disables 8dot3 name creation for all volumes except the system volume.
How to Enable 8dot3name:
1. Open a cmd as Admin and query your existing setting to restore it later:
fsutil.exe 8dot3name query
then enable:
fsutil.exe 8dot3name set 0
2. Install MATLAB
3. Run MATLAB
4. Install “Simulink Arduino Support package”
5. Try to deploy the Arduino model.
Hello folk, I am using windows 10 and i keep seeing this error. I have been trying since 2 days and have tried all options of installing and reinstalling the packages but it hasn't help
'C:\Program' is not recognized as an internal or external command,
operable program or batch file
Has anyone seen this error .. just a quick google search shows that it has been around since a while but i can't seem to get it to work with either arduino Uno, Due or 2650
Hi, the previous generation ArduinoIO library had a library block to read encoders. I couldnt find a replacement for that in the Arduino Simulink Support package. Could you guys please suggest if there is any other way around ? Appreciate your help.
- Supports Mac, Linux, Windows
- From 16b onwards, you can watch signals using External mode at the millisecond rate even on UNO.
- Using a multitasking re-entrant scheduler. This is hard real-time, interrupt based scheduling, you get the crème generated by Simulink by just specifying sample times in your model. Forget about that while() loop scheduling.
- Supports a wide variety of boards (Uno, Mega, Due, Leonardo, etc.)
You have in your hands a tool that sends Rovers to Mars, controls Formula 1 engines and is accessible to young students in the classroom.
Time to get dangerous...
Hi Raghvendra,
From your log, you are programming an Arduino Due board. But the the Wire library you are including is from AVR library which is not correct.
You should include Wire source files from the SAM library path as shown below:
C:\ProgramData\MATLAB\SupportPackages\R2017a\3P.instrset\arduinoide.instrset\idepkgs\packages\arduino\hardware\sam\1.6.7\libraries\Wire\src
I am trying to create a device driver block in Simulink for the Adafruit LSM303 IMU, but I keep running into compilation errors. I've copy-pasted the diagnostics output below. Any suggestions?
It seems to be looking for <avr/io.h> somewhere in the MATLAB support package path.
### Generating code into build folder: C:\Users\Raghu\Documents\Git-SRCL\rvc_teaching_matlab\ae4733\simulink-arduino\lsm303u_test\lsm303u_driver\lsm303u_test1_ert_rtw
### Invoking Target Language Compiler on lsm303u_test1.rtw
### Using System Target File: C:\Program Files\MATLAB\R2017a\rtw\c\ert\ert.tlc
### Loading TLC function libraries
......
### Initial pass through model to cache user defined code
.
### Caching model source code
.........................
### Writing header file lsm303u_test1.h
.
### Writing header file lsm303u_test1_types.h
### Writing header file rtwtypes.h
### Writing header file multiword_types.h
### Writing source file lsm303u_test1.c
### Writing header file lsm303u_test1_private.h
.
### Writing header file rtmodel.h
### Writing source file ert_main.c
### TLC code generation complete.
### Generating TLC interface API.
...
### Creating data type transition file lsm303u_test1_dt.h
.### Evaluating PostCodeGenCommand specified in the model
### Using toolchain: Arduino ARM v1.6.7 | gmake (64-bit Windows)
### 'C:\Users\Raghu\Documents\Git-SRCL\rvc_teaching_matlab\ae4733\simulink-arduino\lsm303u_test\lsm303u_driver\lsm303u_test1_ert_rtw\lsm303u_test1.mk' is up to date
### Building 'lsm303u_test1': "C:\PROGRA~1\MATLAB\R2017a\bin\win64\gmake" -f lsm303u_test1.mk all
C:\Users\Raghu\Documents\Git-SRCL\rvc_teaching_matlab\ae4733\simulink-arduino\lsm303u_test\lsm303u_driver\lsm303u_test1_ert_rtw>cd .
C:\Users\Raghu\Documents\Git-SRCL\rvc_teaching_matlab\ae4733\simulink-arduino\lsm303u_test\lsm303u_driver\lsm303u_test1_ert_rtw>if "" == "" ("C:\PROGRA~1\MATLAB\R2017a\bin\win64\gmake" -f lsm303u_test1.mk all ) else ("C:\PROGRA~1\MATLAB\R2017a\bin\win64\gmake" -f lsm303u_test1.mk )
C:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-none-eabi-gcc -Os -c -g -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -DARDUINO=10607 -MMD -MP -MF"twi.dep" -MT"twi.o" -MD -mcpu=cortex-m3 -DF_CPU=84000000L -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON -DUSB_MANUFACTURER=\""Unknown\"" -DUSB_PRODUCT=\""Arduino Due\"" -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_DUE_ -DMODEL=lsm303u_test1 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DON_TARGET_WAIT_FOR_START=1 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DEXT_MODE=1 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=9 -DMW_TIMERCOUNT=131250 -DMW_SAM_CLOCKID=TC_CMR_TCCLKS_TIMER_CLOCK4 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -DTERMFCN=1 -DONESTEPFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DEXT_MODE=1 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DON_TARGET_WAIT_FOR_START=1 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=lsm303u_test1 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -IC:/Users/Raghu/Documents/Git-SRCL/rvc_teaching_matlab/ae4733/simulink-arduino/lsm303u_test/lsm303u_driver -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/libraries/Wire -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/libraries/Wire/src -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/libraries/Wire/src/utility -IC:/Users/Raghu/Documents/Git-SRCL/rvc_teaching_matlab/ae4733/simulink-arduino/lsm303u_test/lsm303u_driver/include -IC:/Users/Raghu/Documents/Git-SRCL/rvc_teaching_matlab/ae4733/simulink-arduino/lsm303u_test/lsm303u_driver/lsm303u_test1_ert_rtw -IC:/PROGRA~1/MATLAB/R2017a/extern/include -IC:/PROGRA~1/MATLAB/R2017a/simulink/include -IC:/PROGRA~1/MATLAB/R2017a/rtw/c/src -IC:/PROGRA~1/MATLAB/R2017a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2017a/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2017a/toolbox/coder/rtiostream/src/utils -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/system/libsam -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/system/CMSIS/CMSIS/Include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/system/CMSIS/Device/ATMEL -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/cores/arduino/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/variants/arduino_due_x -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/shared/externalmode_daemon/include -o twi.o C:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/libraries/Wire/src/utility/twi.c
C:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/libraries/Wire/src/utility/twi.c:25:20: fatal error: avr/io.h: No such file or directory
#include <avr/io.h>
^
compilation terminated.
gmake: *** [twi.o] Error 1
C:\Users\Raghu\Documents\Git-SRCL\rvc_teaching_matlab\ae4733\simulink-arduino\lsm303u_test\lsm303u_driver\lsm303u_test1_ert_rtw>echo The make command returned an error of 2
The make command returned an error of 2
C:\Users\Raghu\Documents\Git-SRCL\rvc_teaching_matlab\ae4733\simulink-arduino\lsm303u_test\lsm303u_driver\lsm303u_test1_ert_rtw>An_error_occurred_during_the_call_to_make
'An_error_occurred_during_the_call_to_make' is not recognized as an internal or external command,
operable program or batch file.
Hi, i am getting an erratic behaviour of an arduino2560 using the pwm-ports 44,45,46 (together with the digital ports 41-43,47-49 and the analog ports 9,12,13). Any ideas ?
Appreciate your help
Please try to re-install the support package and see if the error goes away. If the problem persists please contact Mathworks Technical support.
hey , Error when deploying simulink model to Arduino
C:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/Arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/bin/avr-g++ -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10613 -MMD -MP -MF"MW_digitalio.dep" -MT"MW_digitalio.o" -Os -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_MEGA2560_ -DMODEL=arduino_gettingstarted -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -D_MW_ARDUINO_LOOP_=1 -DMW_ARDUINO_STEP_SIZE=100000 -DMW_ARDUINO_MICROS -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=arduino_gettingstarted -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -IE:/matlab experiment -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/include -ID:/Program Files/MATLAB/R2017a/simulink/include/sf_runtime -IE:/matlab experiment/arduino_gettingstarted_ert_rtw -ID:/Program Files/MATLAB/R2017a/extern/include -ID:/Program Files/MATLAB/R2017a/simulink/include -ID:/Program Files/MATLAB/R2017a/rtw/c/src -ID:/Program Files/MATLAB/R2017a/rtw/c/src/ext_mode/common -ID:/Program Files/MATLAB/R2017a/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/variants/mega -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/shared/externalmode_daemon/include -o MW_digitalio.o C:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/src/MW_digitalio.cpp
avr-g++: error: experiment: No such file or directory
avr-g++: error: Files/MATLAB/R2017a/simulink/include/sf_runtime: No such file or directory
avr-g++: error: experiment/arduino_gettingstarted_ert_rtw: No such file or directory
avr-g++: error: Files/MATLAB/R2017a/extern/include: No such file or directory
avr-g++: error: Files/MATLAB/R2017a/simulink/include: No such file or directory
avr-g++: error: Files/MATLAB/R2017a/rtw/c/src: No such file or directory
avr-g++: error: Files/MATLAB/R2017a/rtw/c/src/ext_mode/common: No such file or directory
avr-g++: error: Files/MATLAB/R2017a/rtw/c/ert: No such file or directory
gmake: *** [MW_digitalio.o] Error 1
### Build procedure for model: 'arduino_gettingstarted' aborted due to an error.
Error(s) encountered while building "arduino_gettingstarted":
### Failed to generate all binary outputs.
We are supporting WiFi ThingSpeak Read/Write Blocks in R2016b. If may want to upgrade to the same?
Hi, is there any way to install "WiFi ThingSpeak Read" Simulink block in R2016a?
Appreciate your help
Hey,
I am using MATLAB R2016b with the Arduino Hardware Support Package. I got the following error while compiling and uploading to the Arduino ### Failed to generate all binary outputs.
Here is the code generation error report given by the Diagnostic Viewer of Simulink. Can anyone help me fixing this problem please?
"### Invoking Target Language Compiler on Regelkreis_d2c_Testmodell.rtw
### Using System Target File: C:\Program Files\MATLAB\R2016b\rtw\c\ert\ert.tlc
### Loading TLC function libraries
### Initial pass through model to cache user defined code
.
### Caching model source code
### Writing header file Regelkreis_d2c_Testmodell.h
### Writing header file Regelkreis_d2c_Testmodell_types.h
### Writing header file rtwtypes.h
### Writing source file Regelkreis_d2c_Testmodell.c
### Writing header file Regelkreis_d2c_Testmodell_private.h
.
### Writing source file Regelkreis_d2c_Testmodell_data.c
### Writing header file rtmodel.h
### Writing source file ert_main.c
### TLC code generation complete.
### Creating project marker file: rtw_proj.tmw
### Evaluating PostCodeGenCommand specified in the model
### Using toolchain: Arduino AVR v1.6.13 | gmake (64-bit Windows)
### Creating 'C:\Users\durcc\Documents\Regelkreis_d2c_Testmodell_ert_rtw\Regelkreis_d2c_Testmodell.mk' ...
### Building 'Regelkreis_d2c_Testmodell': C:\PROGRA~1\MATLAB\R2016b\bin\win64\gmake -f Regelkreis_d2c_Testmodell.mk all
C:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/bin/avr-gcc -std=gnu11 -c -g -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10613 -MMD -MP -MF"Regelkreis_d2c_Testmodell.dep" -MT"Regelkreis_d2c_Testmodell.o" -Os -mmcu=atmega2560 -DF_CPU=16000000L -DARDUINO_AVR_MEGA2560 -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_MEGA2560_ -DMODEL=Regelkreis_d2c_Testmodell -DNUMST=2 -DNCSTATES=3 -DHAVESTDIO -DONESTEPFCN=1 -DTERMFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DRT -DSTACK_SIZE=64 -DMW_TIMERID=1 -DMW_PRESCALAR=1024 -DMW_TIMERCOUNT=34286 -DMW_SCHEDULERCOUNTER=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -D_RTT_NUMSERVOS_=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=1 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DRT -DSTACK_SIZE=64 -DMODEL=Regelkreis_d2c_Testmodell -DNUMST=2 -DNCSTATES=3 -DHAVESTDIO -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinobase/blocks/sfcn/include -IC:/Users/durcc/Documents/Regelkreis_d2c_Testmodell_ert_rtw -IC:/Users/durcc/Documents -IC:/Users/durcc/Documents/Programme/TestModellSimulink_Arduino -IC:/PROGRA~1/MATLAB/R2016b/extern/include -IC:/PROGRA~1/MATLAB/R2016b/simulink/include -IC:/PROGRA~1/MATLAB/R2016b/rtw/c/src -IC:/PROGRA~1/MATLAB/R2016b/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2016b/rtw/c/ert -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/arduino/avr/variants/mega -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinotarget/registry/../include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinotarget/registry/../scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/hardware/tools/avr/avr/include/avr -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/shared/externalmode_daemon/include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/libraries/Servo/src -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduino-1.6.13/libraries/Servo/src/avr -o "Regelkreis_d2c_Testmodell.o" "Regelkreis_d2c_Testmodell.c"
Regelkreis_d2c_Testmodell.c: In function 'Regelkreis_d2c_Testmodell_step':
Regelkreis_d2c_Testmodell.c:468:1: error: unable to find a register to spill in class 'POINTER_REGS'
}
^
Regelkreis_d2c_Testmodell.c:468:1: error: this is the insn:
(insn 561 560 563 38 (set (reg:SF 178 [ D.3181 ])
(mem:SF (post_inc:HI (reg:HI 214 [ ivtmp.32 ])) [4 MEM[base: _279, offset: 0B]+0 S4 A8])) Regelkreis_d2c_Testmodell.c:294 100 {*movsf}
(expr_list:REG_INC (reg:HI 214 [ ivtmp.32 ])
(nil)))
Regelkreis_d2c_Testmodell.c:468: confused by earlier errors, bailing out
gmake: *** [Regelkreis_d2c_Testmodell.o] Error 1
### Creating HTML report file Regelkreis_d2c_Testmodell_codegen_rpt.html
### Build procedure for model: 'Regelkreis_d2c_Testmodell' aborted due to an error.
Error(s) encountered while building "Regelkreis_d2c_Testmodell":
### Failed to generate all binary outputs."
I already tried to google it and I also tried to follow Pradeep KS's steps to solve my problem. I found component_tc.h in the right place but I could not find arduino ARMScheduler.h
Anyway I got no idea how to get my Simulink Model (simple closed loop control circuit with a PID-Controller and a transfer function) running on Arduino Mega 2560.
Thank you for your help and sorry for the large error code.
Hi Jonas,
Could you please check if CMSIS is correctly installed in the below mentioned path:
C:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduinosam-1.6.7/packages/arduino/hardware/sam/1.6.7/system/CMSIS
You can check by making sure that "component_tc.h" is present under folder:
F:\share\apps\RTT\Arduino\arduinosam-1.6.7\packages\arduino\hardware\sam\1.6.7\system\CMSIS\Device\ATMEL\sam3xa\include\component
From the error log, it looks like Timer library is mssing. Timer Library is part of CMSIS folder.
/../scheduler/include/arduinoARMScheduler.h:63:27: error: unknown type name 'Tc'
How can I fix this Error. Please help
=== Simulation (Elapsed: 11 sec) ===
### Starting build procedure for model: Arduino
### Generating code into build folder: C:\Users\Jonas\Documents\MATLAB\Arduino_ert_rtw
Warning:Parameter precision loss occurred for 'Gain' of 'Arduino/Protection Board 1'. The parameter's value cannot be represented exactly using the run-time data type. A small quantization error has occurred. To disable this warning or error, in the Configuration Parameters > Diagnostics > Data Validity pane, set the 'Detect precision loss' option in the Parameters group to 'none'.
Warning:Parameter precision loss occurred for 'Gain' of 'Arduino/Protection Board 2'. The parameter's value cannot be represented exactly using the run-time data type. A small quantization error has occurred. To disable this warning or error, in the Configuration Parameters > Diagnostics > Data Validity pane, set the 'Detect precision loss' option in the Parameters group to 'none'.
Warning:Parameter precision loss occurred for 'Gain' of 'Arduino/Umrechnung'. The parameter's value cannot be represented exactly using the run-time data type. A small quantization error has occurred. To disable this warning or error, in the Configuration Parameters > Diagnostics > Data Validity pane, set the 'Detect precision loss' option in the Parameters group to 'none'.
Warning:Parameter precision loss occurred for 'Gain' of 'Arduino/Umrechnung1'. The parameter's value cannot be represented exactly using the run-time data type. A small quantization error has occurred. To disable this warning or error, in the Configuration Parameters > Diagnostics > Data Validity pane, set the 'Detect precision loss' option in the Parameters group to 'none'.
Warning:The output(s) read after the base-rate model step reflects intervening minor time steps. To observe data that is a snapshot of output(s) at major time steps, do one of the following:
* Place a Zero-Order Hold block before the continuous output port 'Arduino/Y1'.
* Clear Single output/update function, and read model output values after model_output call and before model_update call.
For more details, see "Single output/update function" in the Simulink documentation.
### Invoking Target Language Compiler on Arduino.rtw
### Using System Target File: C:\Program Files\MATLAB\R2016b\rtw\c\ert\ert.tlc
### Loading TLC function libraries
........
### Initial pass through model to cache user defined code
..
### Caching model source code
............................................
### Writing header file Arduino.h
.
### Writing header file Arduino_types.h
### Writing header file rtwtypes.h
### Writing header file multiword_types.h
### Writing source file Arduino.c
### Writing header file Arduino_private.h
.
### Writing source file Arduino_data.c
### Writing header file rtmodel.h
### Writing source file ert_main.c
### TLC code generation complete.
### Generating TLC interface API.
..........................
### Creating data type transition file Arduino_dt.h
.### Evaluating PostCodeGenCommand specified in the model
### Using toolchain: Arduino ARM v1.6.7 | gmake (64-bit Windows)
### 'C:\Users\Jonas\Documents\MATLAB\Arduino_ert_rtw\Arduino.mk' is up to date
### Building 'Arduino': C:\PROGRA~1\MATLAB\R2016b\bin\win64\gmake -f Arduino.mk all
C:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduinosam-1.6.7/packages/arduino/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-none-eabi-gcc -Os -c -g -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -DARDUINO=10607 -MMD -MP -MF"Arduino.dep" -MT"Arduino.o" -MD -mcpu=cortex-m3 -DF_CPU=84000000L -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON -DUSB_MANUFACTURER=\""Unknown\"" -DUSB_PRODUCT=\""Arduino Due\"" -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_DUE_ -DMODEL=Arduino -DNUMST=2 -DNCSTATES=6 -DHAVESTDIO -DON_TARGET_WAIT_FOR_START=1 -DONESTEPFCN=1 -DEXT_MODE=1 -DTERMFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=1 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DRT -DSTACK_SIZE=64 -DMW_TIMERID=9 -DMW_TIMERCOUNT=13125 -DMW_SAM_CLOCKID=TC_CMR_TCCLKS_TIMER_CLOCK3 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -DONESTEPFCN=1 -DEXT_MODE=1 -DTERMFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=1 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DRT -DSTACK_SIZE=64 -DMODEL=Arduino -DNUMST=2 -DNCSTATES=6 -DHAVESTDIO -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinobase/blocks/sfcn/include -IC:/PROGRA~1/MATLAB/R2016b/simulink/include/sf_runtime -IC:/Users/Jonas/Documents/MATLAB/Arduino_ert_rtw -IC:/Users/Jonas/Documents/MATLAB -IC:/PROGRA~1/MATLAB/R2016b/extern/include -IC:/PROGRA~1/MATLAB/R2016b/simulink/include -IC:/PROGRA~1/MATLAB/R2016b/rtw/c/src -IC:/PROGRA~1/MATLAB/R2016b/rtw/c/src/ext_mode/common -IC:/PROGRA~1/MATLAB/R2016b/rtw/c/ert -IC:/PROGRA~1/MATLAB/R2016b/toolbox/coder/rtiostream/src/utils -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduinosam-1.6.7/packages/arduino/hardware/sam/1.6.7/system/libsam -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduinosam-1.6.7/packages/arduino/hardware/sam/1.6.7/system/CMSIS/CMSIS/Include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduinosam-1.6.7/packages/arduino/hardware/sam/1.6.7/system/CMSIS/Device/ATMEL -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduinosam-1.6.7/packages/arduino/hardware/sam/1.6.7/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduinosam-1.6.7/packages/arduino/hardware/sam/1.6.7/cores/arduino/avr -IC:/ProgramData/MATLAB/SupportPackages/R2016b/3P.instrset/arduinoide.instrset/arduinosam-1.6.7/packages/arduino/hardware/sam/1.6.7/variants/arduino_due_x -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinotarget/registry/../include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinotarget/registry/../scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/shared/externalmode_daemon/include -o "Arduino.o" "Arduino.c"
In file included from MW_target_hardware_resources.h:6:0,
from Arduino.h:42,
from Arduino.c:20:
C:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinotarget/registry/../scheduler/include/arduinoARMScheduler.h:63:27: error: unknown type name 'Tc'
void Setup_SchedulerTimer(Tc *tc, uint32_t channel, uint32_t id, IRQn_Type irqn, uint8_t clockid, uint32_t tickcounter);
^
C:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinotarget/registry/../scheduler/include/arduinoARMScheduler.h:63:66: error: unknown type name 'IRQn_Type'
void Setup_SchedulerTimer(Tc *tc, uint32_t channel, uint32_t id, IRQn_Type irqn, uint8_t clockid, uint32_t tickcounter);
^
C:/ProgramData/MATLAB/SupportPackages/R2016b/toolbox/target/supportpackages/arduinotarget/registry/../scheduler/include/arduinoARMScheduler.h:64:1: error: unknown type name 'boolean'
boolean MW_Arduino_Loop(void);
^
gmake: *** [Arduino.o] Error 1
### Creating HTML report file Arduino_codegen_rpt.html
### Build procedure for model: 'Arduino' aborted due to an error.
Error:Error(s) encountered while building "Arduino":
### Failed to generate all binary outputs.
One of the most used hardware packages and installation does not work. Unbelievable!
Mac OS sierra 10.12.5, Matlab R2016b (and 2017a). In 2016b the download starts but doesn't seem to end (even after 20 hrs download). In 2017a the download gui opens but stays white without any content.
Compilation Error using R2017a on Arduino Due
I got the following Error Message by trying to compile for Arduino Due using R2017a - Please Help...
=== Simulation (Elapsed: 10 sec) ===
### Starting build procedure for model: TestArduinoR2017a
Error:C:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/tools/arm-none-eabi-gcc/4.8.3-2014q1/bin/arm-none-eabi-gcc -Os -c -g -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 -Dprintf=iprintf -DARDUINO=10607 -MMD -MP -MF"TestArduinoR2017a.dep" -MT"TestArduinoR2017a.o" -MD -mcpu=cortex-m3 -DF_CPU=84000000L -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM -D__SAM3X8E__ -mthumb -DUSB_VID=0x2341 -DUSB_PID=0x003e -DUSBCON -DUSB_MANUFACTURER=\""Unknown\"" -DUSB_PRODUCT=\""Arduino Due\"" -D_RUNONTARGETHARDWARE_BUILD_ -D_ROTH_DUE_ -DMODEL=TestArduinoR2017a -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DON_TARGET_WAIT_FOR_START=1 -DEXT_MODE=1 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DMW_TIMERID=9 -DMW_TIMERCOUNT=131250 -DMW_SAM_CLOCKID=TC_CMR_TCCLKS_TIMER_CLOCK4 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_BAUDRATE_SERIAL1_=9600 -D_RTT_BAUDRATE_SERIAL2_=9600 -D_RTT_BAUDRATE_SERIAL3_=9600 -D_RTT_ANALOG_REF_=0 -DEXT_MODE=1 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DTID01EQ=0 -DON_TARGET_WAIT_FOR_START=1 -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=TestArduinoR2017a -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -IC:/Users/coo2sh/Documents/Arduino -IC:/Users/coo2sh/Documents/Arduino/TestArduinoR2017a_ert_rtw -IC:/PROGRA~1/Matlab/R2017a/extern/include -IC:/PROGRA~1/Matlab/R2017a/simulink/include -IC:/PROGRA~1/Matlab/R2017a/rtw/c/src -IC:/PROGRA~1/Matlab/R2017a/rtw/c/src/ext_mode/common -IC:/PROGRA~1/Matlab/R2017a/rtw/c/ert -IC:/PROGRA~1/Matlab/R2017a/toolbox/coder/rtiostream/src/utils -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/system/libsam -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/system/CMSIS/CMSIS/Include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/system/CMSIS/Device/ATMEL -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/cores/arduino/avr -IC:/ProgramData/MATLAB/SupportPackages/R2017a/3P.instrset/arduinoide.instrset/idepkgs/packages/arduino/hardware/sam/1.6.7/variants/arduino_due_x -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/scheduler/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinobase/include -IC:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/shared/externalmode_daemon/include -o TestArduinoR2017a.o TestArduinoR2017a.c
The system cannot find the path specified.
gmake: *** [TestArduinoR2017a.o] Error 1
### Build procedure for model: 'TestArduinoR2017a' aborted due to an error.
Error:Error(s) encountered while building "TestArduinoR2017a":
### Failed to generate all binary outputs.
=== Model Save (Elapsed: 0.322 sec) ===
Hi Om,
The error log shows that make utility is not able to resolve space in the gmake path i.e."E:\Program Files\MATLAB\R2016b\bin\win64\gmake". Could you please check if your system Environment "PATH" has any cygwin entry which might conflict with the Windows cmd shell utility.
If exists, please remove those paths and try building the model.
Note: Take a back of your PATH variable before modifying.
Geting error during uploading simulink model in arduino. Please help
### Generating code into build folder: C:\Users\Om\Documents\MATLAB\untitled1_ert_rtw
### Invoking Target Language Compiler on untitled1.rtw
### Using System Target File: E:\Program Files\MATLAB\R2016b\rtw\c\ert\ert.tlc
### Loading TLC function libraries
### Initial pass through model to cache user defined code
.
### Caching model source code
### Writing header file untitled1.h
### Writing header file untitled1_types.h
### Writing source file untitled1.c
### Writing header file rtwtypes.h
### Writing header file untitled1_private.h
.
### Writing source file untitled1_data.c
### Writing header file rtmodel.h
### Writing source file ert_main.c
### TLC code generation complete.
### Creating project marker file: rtw_proj.tmw
### Evaluating PostCodeGenCommand specified in the model
### Using toolchain: Arduino ARM v1.6.7 | gmake (64-bit Windows)
### Creating 'C:\Users\Om\Documents\MATLAB\untitled1_ert_rtw\untitled1.mk' ...
### Building 'untitled1': E:\Program Files\MATLAB\R2016b\bin\win64\gmake -f untitled1.mk all
'E:\Program' is not recognized as an internal or external command,
operable program or batch file.
### Creating HTML report file untitled1_codegen_rpt.html
### Build procedure for model: 'untitled1' aborted due to an error.
Error(s) encountered while building "untitled1":
### Failed to generate all binary outputs.
Hi Roxy,
Only MATLAB and Simulink License is required to program the Arduino boards.
You need Simulink Coder License to view the generated code.
Does this require Simulink coder?
Finally resolved - thanks to Guarav. Uninstalled the MATLAB and Simulink Arduino Hardware Support Packages. Re-installed (just the Simulink Package) and it works fine now. Not sure if there is any issue with installing the MATLAB package as well.
R2017a arduino_gettingstarted compilation error
I have followed the getting started instructions but get this compiler error:
C:/ProgramData/MATLAB/SupportPackages/R2017a/toolbox/target/supportpackages/arduinotarget/registry/../src/MW_ArduinoHWInit.cpp:33:43: error: 'Serial_begin' was not declared in this scope
Serial_begin(0, _RTT_BAUDRATE_SERIAL0_);
^
gmake: *** [MW_ArduinoHWInit.o] Error 1
### Build procedure for model: 'arduino_gettingstarted' aborted due to an error.
The MATLAB and Simulink HW Support Packages are installed and I have installed the MinGW64 compiler:
'MEX configured to use 'MinGW64 Compiler (C)' for C language compilation.'
What am I missing?
Hi,
Can someone know how to solve the following issue?:
- Tried to install the package Opening the .mlpkginstall file from within MATLAB.
- The following pop-up appears during the installation.
"Error installing third party package Arduino software: Invalid zip file ( than it has been reported the installation path)
Hi all,
Could someone help me with the following issue?:
- Tried to install the package Opening the .mlpkginstall file from within MATLAB.
- The following pop-up appears during the installation.
"Error installing third party package Arduino software: Invalid zip file ( than it has been reported the installation path)
good
In 16b, we added drastic improvements to External mode on Arduino Uno, Mega, Mega ADK and Due.
On Uno and Mega, you can log 1 signal @1kHz without data drops. The limited memory of Uno will allow you to monitor up to 6 signals before you run out of memory.
We increased the baudrate of Uno and Mega boards to 921400 to further improve the experience, while Due still uses 115200.
This is at least 30 times faster than in previous versions, even on the Due board.
Hi,
I have matlab R2013a and an arduino uno and have tried to download and install the support package for Arduino by both methods and it doesnt seem to work.
When I try to manually download it and load it through matlab the open folder does not show that file.
Whereas when I try to download and install it through it asks for permission but then the progress bar is shown stuck at about 80% and then after a while I get an error , please help.
Thanks
thank you for help
Hi Rami,
Not sure if you are looking for Linux support. If you are, note that Linux is supported as a host platform for this support package from R2015b onwards.
More on the system requirements at the following page:
http://www.mathworks.com/hardware-support/system-requirements.html
I hope it helps,
Thanks,
Antonin.
still not working on 2014a...why??
@ tin zar - This particular .mlplginstall file is functional for 13a and beyond... opening the file in 15a will initiate the installation process for the Simulink Support Package for Arduino Hardware.
you can see an overview of the arduino options with MathWorks tools and releases first introduced here:
http://www.mathworks.com/matlabcentral/answers/242924-arduino-support-from-matlab-and-simulink-across-releases
can this support package also work for matlab R2015a?
I am able to install but not able to open the library. Please help.
The problem of installing the package on R2014a has been reported several times. It is ironic that MATLAB package is installed with no problems. The problem has been presentiment for months although other packages are installed successfully like Raspberry Pi and USB webcam
When I am trying to install the arduino package it says
Possible causes:
- You have recently cleared your MATLAB preferences, or
- You are using a shared MATLAB installation and the above support packages
were installed by another user.
I am not understanding what to do.
But i have successfully installed Arduino Due package. Can anyone help me
When I double-click the aruinoio.mlpkginstall file in the Current Folder window in Matlab 2014a on Ubuntu 12.04 LTS, I get an error-dialog stating:
MATLAB Support Package for Arduino Hardware cannot be installed on this system. It requires: Base Product: MATLAB Host Platforms: Win32,Win64,Mac64
How do I connect to Arduino from Matlab from Linux?
Hi. I am trying to use this package with an Arduino Uno board that's connected to a motor driver to drive a motor to my desired position and speed (later with implementing a PID controller).
I was wondering how I can use this package with the motor real time. Or how I can design the PID controller in Simulink for this application.
Thank you.
Thanks Md. Ashfaque & Sreeram! As a temporary solution I used the for iterator block and buffered the bytes in an array. I shall look into custom blocks later on for better efficiency.
Hi Carlos,
There are two options
1) One could use for iterator block or something that can read bytes one by one and then buffer them as per application needs in the model
2) or on the contrary create a custom block that uses the Serial.readBytes function from the arduino standard library. http://arduino.cc/en/Serial/ReadBytes
For creating a Custom driver block one could follow the guide published at
http://www.mathworks.in/matlabcentral/fileexchange/39354-device-drivers
Hope this helps,
Thanks,
Sreeram Mohan
Hi Carlos,
The best way to transmit an array of characters/string is to use the s-function builder block and simply use the Serial.print() command that is used in the Arduino IDE.
Hello, if I want to read multiple bytes of data in each time step, what I should do with the Serial Read block since it only read 1 byte everytime? Thanks.
It has problems in Windows 8.1 when I try to download model to Arduino.
I have a problem on using most of the PWM pins in PWM block for Arduino Mega 2560. The warning prompt shows this block only for Arduino UNO not Arduino Mega although the mask prompt written it support both boards. Please help me on this
Support package installer is supported since R2012a. Type in "targetinstaller" at the MATLAB command prompt to launch the installer.
Support Package Installer only for MATLAB 8.1 (R2013a)?
Hi, I´m trying to do data adquisition with arduino in simulink, I configured the device and run the configurations (build the code), but I have a problem, when I start te simulation appear a error message, "Checksum mismatch. Verify the correct target application is running and if necessary rebuild target code."
I appreciate your help, thanks!
it's a good tool