# Nathan Hardenberg

Active since 2020

Followers: 0   Following: 0

Programming Languages:
Python, C, MATLAB, Arduino, Visual Basic
Spoken Languages:
English, German
Pronouns:
He/him

All

#### Feeds

View by

Plotting Ellipsoids on XYZ graphs.
For extracting the data from the Excel Sheet you can use build in Matlab functions, like the readtable()-function. I won't go in...

10 months ago | 0

Wie kann ich Binärbilder in einer Montage korrekt darstellen?
Mit deiner Beschreibung ist es leider schwierig dir zu helfen. Sinnvoll wäre es, wenn du Screenshots von deinen figures mit anhä...

12 months ago | 0

how to plot deformation on a cracked plate?
Firstly I'm plotting a crack similar to the example image. This is done using two surf-plots and is easily possible since the cr...

12 months ago | 1

| accepted

does the rotational port S recognize the load flow?
You can understand the rotational port as a welding joint with a rigid rotating rod. The rod beeing the "light green wire" in th...

12 months ago | 0

How to improve readability of this contour / pcolor plot?
There seems to be an issue with the color that gets plotted over the contour. I just plotted the contour afterwards with good re...

12 months ago | 0

| accepted

How to optimize the code?
You write "the code fails to compile". What do you mean by that? You most likely run the code, and it takes very long to finish,...

12 months ago | 0

| accepted

How can write this equation in matlab?
You do not specify what is so I will disregard it at first. Also your variables are vectors/matricies if I see that correctly. ...

12 months ago | 2

| accepted

The number is added by default if you just use the high numbers directly x = [10:0.1:12]*10^9; y = sin(x); plot(x,y) -- EDIT...

12 months ago | 0

| accepted

Color the area between two plots
One way to achive this is like this: x1 = 1:0.05:2; % graph 1 y1 = exp(x1) + 1; x2 = 1:0.05:2; % graph 2 y2 = exp(x2); ...

1 year ago | 0

How to build a air pressurized tank
Your setup works for me if you change one setting in the "Thermal Liquid Properties (TL)"-Block: Pressure and temperature outsid...

1 year ago | 0

| accepted

I'm unsure as to why MATLAB is returning an infinite root no matter the initial guess. Can someone help with this?
I'm very unsure what algorithm this should be. Can you provide more information. You could do it with something like newton's me...

1 year ago | 0

| accepted

How to correctly use contourf with logarithmic color scale?
There are two ways I know of: Define your own (manual) values on which contours should be drawn, or just plot the logarithmic ...

1 year ago | 0

connecting dc motor to assembly
First of all I would recommend a "Revolute Joint" instead of a "Cylindirical Joint". A cylindrical joint can also move linearly ...

1 year ago | 0

DIFFICULTY LOCATING SIMSCAPE BLOCK
As a help to find the blocks easier, you can launch the standalone library browser (if you didn't do that already). For that cli...

1 year ago | 1

How to display pi symbol in the output?
You can display pi as a sybolic disp(sym(pi)) Or you can use a π-character (𝜋 or π). disp("𝜋") disp("π")

1 year ago | 0

Find X,Y,Z of this linear
This is very simple to do. I choose diffenent numbers, since I don't know how your "."-delimiters are meant to be. syms x y z ...

1 year ago | 0

How to have variable as time-dependent in Stateflow?
Check out this MATLAB documentation example: https://mathworks.com/help/stateflow/gs/stateflow-charts.html This is pretty much...

1 year ago | 0

matlab not displaying an approximated value of an improper integral?
Here are some ideas, but please still regard my comment. You have two variables x and p. You can not approximate numerically th...

1 year ago | 2

| accepted

Discontinuity in plot after applying moving average filter
This discontinuity is to be expected! That is what the moving average does. The ends gets averaged also, and thus do get shifted...

1 year ago | 1

Error in port widths or dimensions. Invalid dimension has been specified for 'Input Port 1'
The error seems to be noticed in 'MicrogridActivePowerControl/powergui/EquivalentModel1/Gates/From1'. I'm guessing this is the "...

1 year ago | 1

| accepted

I cant sign in using my university account. and seem to be stuck in a loop

1 year ago | 0

4D plot matlab gives error
The error-message is pretty precise. If you want to plot a surface you need a z-hight for every (x,y) position. Thats why it nee...

1 year ago | 0

Remove white space around a horizontal bar
Adjusting the bar width should work. Just choosing a big number is maybe good enough. x = [0]; % data y = [15 20 5]; % data ...

1 year ago | 1

Mechatronics Simscape multibody help
Thanks for providing the model. First of all, input and output-torque will always be exactly the same, since you already provi...

1 year ago | 0

| accepted

How to plot humidity data on a world map?
An easy way would be to use geoscatter(). This does not interpolate but just plots the points with color according to the value....

1 year ago | 0

Here the results from the comments Possible fixes: Reducing "Fixed-step size (fundamental sample time)" Increase baud rate. H...

1 year ago | 0

| accepted

How to do interpolation on the map?
You can interpolate the datapoints with the griddata() function. As @Walter Roberson mentioned this also assumes a uniform grid,...

1 year ago | 0

| accepted

Simscape multibody in R2022b
I do not know, why this worked for you in R2021b. I did not test it in that version, but it did not seem to work for @Shree Char...

1 year ago | 0