Main Content


Joint torques that compensate gravity


gravTorq = gravityTorque(robot) computes the joint torques required to hold the robot at its home configuration.


gravTorq = gravityTorque(robot,configuration) specifies a joint configuration for calculating the gravity torque.


collapse all

Load a predefined KUKA LBR robot model, which is specified as a RigidBodyTree object.

load exampleRobots.mat lbr

Set the data format to 'row'. For all dynamics calculations, the data format must be either 'row' or 'column'. Set the Gravity property.

lbr.DataFormat = 'row'; 
lbr.Gravity = [0 0 -9.81];

Get a random configuration for lbr.

q = randomConfiguration(lbr);

Compute the gravity-compensating torques for each joint.

gtau = gravityTorque(lbr,q);

Input Arguments

collapse all

Robot model, specified as a rigidBodyTree object. To use the gravityTorque function, set the DataFormat property to either 'row' or 'column'.

Robot configuration, specified as a vector with positions for all nonfixed joints in the robot model. You can generate a configuration using homeConfiguration(robot), randomConfiguration(robot), or by specifying your own joint positions. To use the vector form of configuration, set the DataFormat property for the robot to either 'row' or 'column' .

Output Arguments

collapse all

Gravity-compensating torque for each joint, returned as a vector.

More About

collapse all

Dynamics Properties

When working with robot dynamics, specify the information for individual bodies of your manipulator robot using these properties of the rigidBody objects:

  • Mass — Mass of the rigid body in kilograms.

  • CenterOfMass — Center of mass position of the rigid body, specified as a vector of the form [x y z]. The vector describes the location of the center of mass of the rigid body, relative to the body frame, in meters. The centerOfMass object function uses these rigid body property values when computing the center of mass of a robot.

  • Inertia — Inertia of the rigid body, specified as a vector of the form [Ixx Iyy Izz Iyz Ixz Ixy]. The vector is relative to the body frame in kilogram square meters. The inertia tensor is a positive definite matrix of the form:

    A 3-by-3 matrix. The first row contains Ixx, Ixy, and Ixz. The second contains Ixy, Iyy, and Iyz. The third contains Ixz, Iyz, and Izz.

    The first three elements of the Inertia vector are the moment of inertia, which are the diagonal elements of the inertia tensor. The last three elements are the product of inertia, which are the off-diagonal elements of the inertia tensor.

For information related to the entire manipulator robot model, specify these rigidBodyTree object properties:

  • Gravity — Gravitational acceleration experienced by the robot, specified as an [x y z] vector in m/s2. By default, there is no gravitational acceleration.

  • DataFormat — The input and output data format for the kinematics and dynamics functions, specified as "struct", "row", or "column".

Dynamics Equations

Manipulator rigid body dynamics are governed by this equation:


also written as:



  • M(q) — is a joint-space mass matrix based on the current robot configuration. Calculate this matrix by using the massMatrix object function.

  • C(q,q˙) — is the coriolis terms, which are multiplied by q˙ to calculate the velocity product. Calculate the velocity product by using by the velocityProduct object function.

  • G(q) — is the gravity torques and forces required for all joints to maintain their positions in the specified gravity Gravity. Calculate the gravity torque by using the gravityTorque object function.

  • J(q) — is the geometric Jacobian for the specified joint configuration. Calculate the geometric Jacobian by using the geometricJacobian object function.

  • FExt — is a matrix of the external forces applied to the rigid body. Generate external forces by using the externalForce object function.

  • τ — are the joint torques and forces applied directly as a vector to each joint.

  • q,q˙,q¨ — are the joint configuration, joint velocities, and joint accelerations, respectively, as individual vectors. For revolute joints, specify values in radians, rad/s, and rad/s2, respectively. For prismatic joints, specify in meters, m/s, and m/s2.

To compute the dynamics directly, use the forwardDynamics object function. The function calculates the joint accelerations for the specified combinations of the above inputs.

To achieve a certain set of motions, use the inverseDynamics object function. The function calculates the joint torques required to achieve the specified configuration, velocities, accelerations, and external forces.


[1] Featherstone, Roy. Rigid Body Dynamics Algorithms. Springer US, 2008. (Crossref), doi:10.1007/978-1-4899-7560-7.

Extended Capabilities

Version History

Introduced in R2017a