Main Content

End-to-End Simulation

Waveform generation, signal recovery, and end-to-end satellite communications link modeling

You can use Satellite Communications Toolbox functions to demodulate and decode waveforms. These functions process received signals under an additive white Gaussian noise (AWGN) channel, assuming perfect synchronization and ideal RF conditions.

Examples featured in this section demonstrate how to model end-to-end communications link and analyze link performance. You can use these examples as a reference in verification, performance analysis, and RF front-end testing.


expand all

ccsdsTCConfigCCSDS TC configuration parameters
ccsdsTCWaveformGenerate CCSDS TC waveform
ccsdsTMWaveformGeneratorGenerate CCSDS TM waveform
dvbs2WaveformGeneratorGenerate DVB-S2 waveform
dvbs2xWaveformGeneratorGenerate DVB-S2X waveform
dvbrcs2WaveformGeneratorGenerate DVB-RCS2 waveform
ccsdsTCIdealReceiverIdeal receiver for CCSDS TC waveform
dvbs2BitRecoverRecover bits for DVB-S2 PL frames
dvbs2xBitRecoverRecover bits for DVB-S2X PL frames
dvbrcs2RecoveryConfigReceiver configuration parameters for DVB-RCS2
dvbrcs2BitRecoverRecover bits for DVB-RCS2 waveform
gnssBitSynchronizeBit synchronizer for GNSS receivers
gnssSignalAcquirerAcquire GNSS signals
comm.EVMMeasure error vector magnitude (EVM) of received signal
comm.ErrorRateCompute bit or symbol error rate of input data