Change settling time in simulink

10 views (last 30 days)
Ilyan
Ilyan on 9 Dec 2024
Answered: Sameer on 9 Dec 2024
hello, I'm doing a project on a clamp system and I get this graph except that I'd like to change the settling time to between 1 and 1.5 seconds. I don't know how to do this. Can you help me?

Answers (1)

Sameer
Sameer on 9 Dec 2024
To adjust the settling time of your clamp system to between 1 and 1.5 seconds, you can modify the system parameters.
1. Determine if your system is first-order or second-order. Settling time is typically associated with second-order systems.
2. Adjust System Parameters:
  • Gain: Increasing the gain can reduce the settling time, but be cautious as it may also increase overshoot.
  • Damping Ratio: For a second-order system, increasing the damping ratio can help reduce overshoot and settling time.
  • Natural Frequency: Increasing the natural frequency will generally decrease the settling time.
3. Implement a PID controller to fine-tune the response. Adjust the proportional, integral, and derivative gains to achieve the desired settling time.
Hope this helps!

Categories

Find more on Linear Model Identification in Help Center and File Exchange

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!