Push Button block - disappearing Issue

I am using push button in my simulink model to take input from user for button press.

I am using customised Image on top for that button. It works well until I close the model.

Once I repon the model, Push button disappears and only boundary of the Push button remains visible in the same area.

If I click on the button no click action is getting performed but it highlights connected blocks that using its input on click action.

I have checked image path, it is kept at the same path where model is stored.

[dpb]

Have you defined an icon/image for each possible state of the push button? I'd conjecture there isn't anything defined for one or more states and that's the state getting saved/restored from when close.

[Priyesh]

Yes, there are 2 states for the momentary type switches. I am using different color for each state keeping the image same.

It should be either ON or OFF, not sure which state it enters when restored. Thanks.

[dpb]

I've never even seen an installation of Simulink so "I know nuthink!" a la Sgt Schultz, but <Custom Push Button> doc indicates the states are

• While you push the button, the block is in the Pressed state.
• When the button is latched and you are not pushing it, the block is in the Latched state.
• When the button is latched and you are pushing it, the block is in the Latched and Pressed state.
• When the block is not in any of these three states, it is in the Default state.

It would seem to me each of those whould have to have a defined image if customized.

Have you been able to get an example to work?

I presume if you don't try the customized image, your model will also work to prove it is something in the images?