The discrete-time system models are representational schemes for digital filters. The
MATLAB^{®} technical computing environment supports several discrete-time system models,
which are described in the following sections:

The *transfer function* is a basic Z-domain representation of a digital
filter, expressing the filter as a ratio of two polynomials. It is the principal
discrete-time model for this toolbox. The transfer function model description for the
Z-transform of a digital filter's difference equation is

$$Y(z)=\frac{b(1)+b(2){z}^{-1}+\dots +b(n+1){z}^{-n}}{a(1)+a(2){z}^{-1}+\dots +a(m+1){z}^{-m}}X(z).$$

Here, the constants *b*(*i*)
and *a*(*i*) are the filter coefficients,
and the order of the filter is the maximum of *n* and *m*.
In the MATLAB environment, you store these coefficients in two
vectors (row vectors by convention), one row vector for the numerator
and one for the denominator. See Filters and Transfer Functions for more
details on the transfer function form.

The factored or *zero-pole-gain* form of a transfer function is

$$H(z)=\frac{q(z)}{p(z)}=k\frac{(z-q(1))(z-q(2))\mathrm{...}(z-q(n))}{(z-p(1))(z-p(2))\mathrm{...}(z-p(n))}.$$

By convention, polynomial coefficients are stored in row vectors
and polynomial roots in column vectors. In zero-pole-gain form, therefore,
the zero and pole locations for the numerator and denominator of a
transfer function reside in column vectors. The factored transfer
function gain *k* is a MATLAB scalar.

The `poly`

and `roots`

functions convert between polynomial
and zero-pole-gain representations. For example, a simple IIR filter
is

b = [2 3 4]; a = [1 3 3 1];

The zeros and poles of this filter are

```
q = roots(b)
p = roots(a)
% Gain factor
k = b(1)/a(1)
```

Returning to the original polynomials,

bb = k*poly(q) aa = poly(p)

Note that `b`

and `a`

in this
case represent the transfer function:

$$H(z)=\frac{2+3{z}^{-1}+4{z}^{-2}}{1+3{z}^{-1}+3{z}^{-2}+{z}^{-3}}=\frac{z\text{\hspace{0.17em}}(2{z}^{2}+3z+4)}{{z}^{3}+3{z}^{2}+3z+1}.$$

For `b = [2 3 4]`

, the `roots`

function misses the zero for
*z* equal to 0. In fact, the function misses poles and zeros for
*z* equal to 0 whenever the input transfer function has more poles than
zeros, or vice versa. This is acceptable in most cases. To circumvent the problem, however,
simply append zeros to make the vectors the same length before using the
`roots`

function; for example, `b = [b 0]`

.

It is always possible to represent a digital filter, or a system of difference equations, as a
set of first-order difference equations. In matrix or *state-space*
form, you can write the equations as

$$\begin{array}{c}x(n+1)=Ax(n)+Bu(n)\\ y(n)\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}\text{\hspace{0.05em}}=Cx(n)+Du(n),\end{array}$$

where `u`

is the input, `x`

is
the state vector, and `y`

is the output. For single-channel
systems, `A`

is an `m`

-by-`m`

matrix
where `m`

is the order of the filter, `B`

is
a column vector, `C`

is a row vector, and `D`

is
a scalar. State-space notation is especially convenient for multichannel
systems where input `u`

and output `y`

become
vectors, and `B`

, `C`

, and `D`

become
matrices.

State-space representation extends easily to the MATLAB environment. `A`

, `B`

, `C`

,
and `D`

are rectangular arrays; MATLAB functions
treat them as individual variables.

Taking the Z-transform of the state-space equations and combining them shows the equivalence of state-space and transfer function forms:

$$Y(z)=H(z)U(z)\text{,where}H(z)=C{(zI-A)}^{-1}B+D$$

Don't be concerned if you are not familiar with the state-space representation of linear systems. Some of the filter design algorithms use state-space form internally but do not require any knowledge of state-space concepts to use them successfully. If your applications use state-space based signal processing extensively, however, see the Control System Toolbox™ product for a comprehensive library of state-space tools.

Each transfer function also has a corresponding *partial fraction
expansion* or *residue* form representation, given by

$$\frac{b(z)}{a(z)}=\frac{r(1)}{1-p(1){z}^{-1}}+\mathrm{...}+\frac{r(n)}{1-p(n){z}^{-1}}+k(1)+k(2){z}^{-1}+\mathrm{...}+k(m-n+1){z}^{-(m-n)}$$

provided *H*(*z*) has no repeated
poles. Here, *n* is the degree of the denominator
polynomial of the rational transfer function *b*(*z*)/*a*(*z*).
If *r* is a pole of multiplicity *s _{r}*,
then

$$\frac{r(j)}{1-p(j){z}^{-1}}+\frac{r(j+1)}{{(1-p(j){z}^{-1})}^{2}}\mathrm{...}+\frac{r(j+{s}_{r}-1)}{{(1-p(j){z}^{-1})}^{{s}_{r}}}$$

The Signal
Processing Toolbox™ `residuez`

function
in converts transfer functions to and from the partial fraction expansion
form. The “`z`

” on the end of `residuez`

stands
for *z*-domain, or discrete domain. `residuez`

returns
the poles in a column vector `p`

, the residues corresponding
to the poles in a column vector `r`

,
and any improper part of the original transfer function in a row vector `k`

. `residuez`

determines
that two poles are the same if the magnitude of their difference is
smaller than 0.1 percent of either of the poles' magnitudes.

Partial fraction expansion arises in signal processing as one method of finding the inverse Z-transform of a transfer function. For example, the partial fraction expansion of

$$H(z)=\frac{-4+8{z}^{-1}}{1+6{z}^{-1}+8{z}^{-2}}$$

is

b = [-4 8]; a = [1 6 8]; [r,p,k] = residuez(b,a)

which corresponds to

$$H(z)=\frac{-12}{1+4{z}^{-1}}+\frac{8}{1+2{z}^{-1}}$$

To find the inverse Z-transform of *H*(*z*),
find the sum of the inverse Z-transforms of the two addends of *H*(*z*),
giving the causal impulse response:

$$h(n)=-12{(-4)}^{n}+8{(-2)}^{n},\text{\hspace{1em}}n=0,1,2,\dots $$

To verify this in the MATLAB environment, type

```
imp = [1 0 0 0 0];
resptf = filter(b,a,imp)
respres = filter(r(1),[1 -p(1)],imp)+...
filter(r(2),[1 -p(2)],imp)
```

Any transfer function *H*(*z*) has a *second-order
sections* representation

$$H(z)={\displaystyle \prod _{k=1}^{L}{H}_{k}}(z)={\displaystyle \prod _{k=1}^{L}\frac{{b}_{0k}+{b}_{1k}{z}^{-1}+{b}_{2k}{z}^{-2}}{{a}_{0k}+{a}_{1k}{z}^{-1}+{a}_{2k}{z}^{-2}}}$$

where *L* is the number of second-order sections
that describe the system. The MATLAB environment represents the
second-order section form of a discrete-time system as an *L*-by-6
array `sos`

. Each row of `sos`

contains
a single second-order section, where the row elements are the three
numerator and three denominator coefficients that describe the second-order
section.

$$\text{sos}=\left(\begin{array}{llllll}{b}_{01}\hfill & {b}_{11}\hfill & {b}_{21}\hfill & {a}_{01}\hfill & {a}_{11}\hfill & {a}_{21}\hfill \\ {b}_{02}\hfill & {b}_{12}\hfill & {b}_{22}\hfill & {a}_{02}\hfill & {a}_{12}\hfill & {a}_{22}\hfill \\ \vdots \hfill & \vdots \hfill & \vdots \hfill & \vdots \hfill & \vdots \hfill & \vdots \hfill \\ {b}_{0L}\hfill & {b}_{1L}\hfill & {b}_{2L}\hfill & {a}_{0L}\hfill & {a}_{1L}\hfill & {a}_{2L}\hfill \end{array}\right)$$

There are many ways to represent a filter in second-order section
form. Through careful pairing of the pole and zero pairs, ordering
of the sections in the cascade, and multiplicative scaling of the
sections, it is possible to reduce quantization noise gain and avoid
overflow in some fixed-point filter implementations. The functions `zp2sos`

and `ss2sos`

,
described in Linear System Transformations, perform pole-zero pairing,
section scaling, and section ordering.

All Signal Processing Toolbox second-order section transformations apply only to digital filters.

For a discrete *N*th order all-pole or all-zero
filter described by the polynomial coefficients *a*(*n*)*,
n* = 1, 2, ...*, N*+1, there
are *N* corresponding lattice structure coefficients *k*(*n*)*,
n* = 1, 2, ...*, N*. The parameters *k*(*n*)
are also called the *reflection coefficients* of
the filter. Given these reflection coefficients, you can implement
a discrete filter as shown below.

**FIR and IIR Lattice Filter structure diagrams**

For a general pole-zero IIR filter described by polynomial coefficients *a* and *b*,
there are both lattice coefficients *k*(*n*)
for the denominator *a* and ladder coefficients *v*(*n*)
for the numerator *b*. The lattice/ladder filter
may be implemented as

**Diagram of lattice/ladder filter**

The toolbox function `tf2latc`

accepts
an FIR or IIR filter in polynomial form and returns the corresponding
reflection coefficients. An example FIR filter in polynomial form
is

b = [1.0000 0.6149 0.9899 0.0000 0.0031 -0.0082];

This filter's lattice (reflection coefficient) representation is

k = tf2latc(b)

For IIR filters, the magnitude of the reflection coefficients provides an easy stability
check. If all the reflection coefficients corresponding to a polynomial have magnitude less
than 1, all of that polynomial's roots are inside the unit circle. For example, consider an
IIR filter with numerator polynomial `b`

from above and denominator
polynomial:

a = [1 1/2 1/3];

The filter's lattice representation is

[k,v] = tf2latc(b,a);

Because `abs(k)`

< `1`

for all reflection coefficients
in `k`

, the filter is stable.

The function `latc2tf`

calculates
the polynomial coefficients for a filter from its lattice (reflection)
coefficients. Given the reflection coefficient vector `k`

,
the corresponding polynomial form is

b = latc2tf(k);

The lattice or lattice/ladder coefficients can be used to implement
the filter using the function `latcfilt`

.

In signal processing, convolving two vectors or matrices is equivalent to filtering one of the
input operands by the other. This relationship permits the representation of a digital
filter as a *convolution matrix*.

Given any vector, the toolbox function `convmtx`

generates
a matrix whose inner product with another vector is equivalent to
the convolution of the two vectors. The generated matrix represents
a digital filter that you can apply to any vector of appropriate length;
the inner dimension of the operands must agree to compute the inner
product.

The convolution matrix for a vector `b`

, representing
the numerator coefficients for a digital filter, is

b = [1 2 3]; x = randn(3,1); C = convmtx(b',3);

Two equivalent ways to convolve `b`

with `x`

are
as follows.

y1 = C*x; y2 = conv(b,x);